Sequencer

The sequencer module is responsible for adding the parameters of a single sequencer within a module.

class qblox_instruments.qcodes_drivers.sequencer.Sequencer(parent: Instrument | InstrumentChannel, name: str, seq_idx: int)[source]

Bases: InstrumentChannel

This class represents a single sequencer. It combines all sequencer specific parameters and functions into a single QCoDes InstrumentChannel.

__init__(parent: Instrument | InstrumentChannel, name: str, seq_idx: int)[source]

Creates a sequencer class and adds all relevant parameters for the sequencer.

Parameters:

parent (Union[Instrument, InstrumentChannel]) – The QCoDeS class to which this sequencer belongs.
name (str) – Name of this sequencer channel
seq_idx (int) – The index of this sequencer in the parent instrument, representing which sequencer is controlled by this class.

property seq_idx: int

Get sequencer index.

Returns:: Sequencer index
Return type:: int

set_trigger_thresholding(address: int, count: int, invert: bool) → None[source]

Sets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied
count (int) – Threshold
invert (bool) – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

get_trigger_thresholding(address: int) → Tuple[source]

Gets threshold for designated trigger address counter, together with the inversion condition. Thresholding condition used: greater than or equal.

Parameters:

address (int) – Trigger address to which the settings are applied

Returns:

int – Threshold
bool – Comparison result inversion

Raises:

NotImplementedError – Functionality not available on this module.

reset_trigger_thresholding() → None[source]

Resets trigger thresholds for all trigger address counters (T1 to T15) back to 0. Also resets inversion back to false.

Raises:: NotImplementedError – Functionality not available on this module.

Pulsar QCoDeS parameters

QCoDeS parameters generated by Sequencer.

Pulsar QCM parameters

`(Pulsar QCM) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.channel_map_path0_out2_en`

Sets/gets sequencer channel map enable of path 0 to output 2.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.channel_map_path1_out3_en`

Sets/gets sequencer channel map enable of path 1 to output 3.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Pulsar QCM) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Pulsar QCM) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Pulsar QCM) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Pulsar QCM) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Pulsar QCM) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Pulsar QCM) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Pulsar QCM) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QCM) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QCM) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Pulsar QCM) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QCM) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QCM) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QCM) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Pulsar QCM) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Pulsar QCM) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

Pulsar QRM parameters

`(Pulsar QRM) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Pulsar QRM) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Pulsar QRM) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Pulsar QRM) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Pulsar QRM) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Pulsar QRM) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Pulsar QRM) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Pulsar QRM) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QRM) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QRM) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Pulsar QRM) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Pulsar QRM) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QRM) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QRM) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Pulsar QRM) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Pulsar QRM) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.demod_en_acq`

Sets/gets sequencer demodulation enable for acquisition.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.integration_length_acq`

Sets/gets sequencer integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties:

value: Numbers 4<=v<=16777212

`(Pulsar QRM) sequencer.thresholded_acq_rotation`

Sets/gets sequencer integration result phase rotation in degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Pulsar QRM) sequencer.thresholded_acq_threshold`

Sets/gets sequencer discretization threshold for discretizing the phase rotation result. Discretization is done by comparing the threshold to the rotated integration result of path 0. This comparison is applied before normalization (i.e. division) of the rotated value with the integration length and therefore the threshold needs to be compensated (i.e. multiplied) with this length for the discretization to function properly.

Properties:

value: Numbers -16777212.0<=v<=16777212.0

`(Pulsar QRM) sequencer.thresholded_acq_marker_en`

Enable mapping of thresholded acquisition result to markers.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.thresholded_acq_marker_address`

Sets/gets the marker mask which maps the thresholded acquisition result to the markers (M1 to M4).

Properties:

value: Numbers 0<=v<=15

`(Pulsar QRM) sequencer.thresholded_acq_marker_invert`

Sets/gets inversion of the thresholded acquistion result before it is masked onto the markers.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.thresholded_acq_trigger_en`

Sets/gets mapping of thresholded acquisition result to trigger network.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.thresholded_acq_trigger_address`

Sets/gets the trigger address to which the thresholded acquisition result is mapped to the trigger network (T1 to T15)

Properties:

value: Numbers 1<=v<=15

`(Pulsar QRM) sequencer.thresholded_acq_trigger_invert`

Sets/gets the inversion of the thresholded acquistion result before it is mapped to the trigger network.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.ttl_acq_auto_bin_incr_en`

Sets/gets whether the bin index is automatically incremented when acquiring multiple triggers. Disabling the TTL trigger acquisition path resets the bin index.

Properties:

value: Boolean

`(Pulsar QRM) sequencer.ttl_acq_threshold`

Sets/gets the threshold value with which to compare the input ADC values of the selected input path.

Properties:

value: Numbers -1.0<=v<=1.0

`(Pulsar QRM) sequencer.ttl_acq_input_select`

Sets/gets the input used to compare against the threshold value in the TTL trigger acquisition path.

Properties:

value: Numbers 0<=v<=1

Cluster QCoDeS parameters

QCoDeS parameters generated by Sequencer.

Cluster QCM parameters

`(Cluster QCM) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Cluster QCM) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Cluster QCM) sequencer.channel_map_path0_out2_en`

Sets/gets sequencer channel map enable of path 0 to output 2.

Properties:

value: Boolean

`(Cluster QCM) sequencer.channel_map_path1_out3_en`

Sets/gets sequencer channel map enable of path 1 to output 3.

Properties:

value: Boolean

`(Cluster QCM) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Cluster QCM) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Cluster QCM) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QCM) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Cluster QCM) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Cluster QCM) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Cluster QCM) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Cluster QCM) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Cluster QCM) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Cluster QCM) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Cluster QCM) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Cluster QCM) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QCM) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Cluster QCM) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QCM) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Cluster QCM) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Cluster QCM) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

Cluster QCM-RF parameters

`(Cluster QCM-RF) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.channel_map_path0_out2_en`

Sets/gets sequencer channel map enable of path 0 to output 2.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.channel_map_path1_out3_en`

Sets/gets sequencer channel map enable of path 1 to output 3.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 300 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Cluster QCM-RF) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QCM-RF) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Cluster QCM-RF) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Cluster QCM-RF) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Cluster QCM-RF) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Cluster QCM-RF) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QCM-RF) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM-RF) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM-RF) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Cluster QCM-RF) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QCM-RF) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QCM-RF) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM-RF) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QCM-RF) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Cluster QCM-RF) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Cluster QCM-RF) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

Cluster QRM parameters

`(Cluster QRM) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Cluster QRM) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Cluster QRM) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Cluster QRM) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 350 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Cluster QRM) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QRM) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Cluster QRM) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Cluster QRM) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Cluster QRM) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Cluster QRM) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Cluster QRM) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Cluster QRM) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Cluster QRM) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Cluster QRM) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QRM) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Cluster QRM) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QRM) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Cluster QRM) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Cluster QRM) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

`(Cluster QRM) sequencer.demod_en_acq`

Sets/gets sequencer demodulation enable for acquisition.

Properties:

value: Boolean

`(Cluster QRM) sequencer.integration_length_acq`

Sets/gets sequencer integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties:

value: Numbers 4<=v<=16777212

`(Cluster QRM) sequencer.thresholded_acq_rotation`

Sets/gets sequencer integration result phase rotation in degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QRM) sequencer.thresholded_acq_threshold`

Sets/gets sequencer discretization threshold for discretizing the phase rotation result. Discretization is done by comparing the threshold to the rotated integration result of path 0. This comparison is applied before normalization (i.e. division) of the rotated value with the integration length and therefore the threshold needs to be compensated (i.e. multiplied) with this length for the discretization to function properly.

Properties:

value: Numbers -16777212.0<=v<=16777212.0

`(Cluster QRM) sequencer.thresholded_acq_marker_en`

Enable mapping of thresholded acquisition result to markers.

Properties:

value: Boolean

`(Cluster QRM) sequencer.thresholded_acq_marker_address`

Sets/gets the marker mask which maps the thresholded acquisition result to the markers (M1 to M4).

Properties:

value: Numbers 0<=v<=15

`(Cluster QRM) sequencer.thresholded_acq_marker_invert`

Sets/gets inversion of the thresholded acquistion result before it is masked onto the markers.

Properties:

value: Boolean

`(Cluster QRM) sequencer.thresholded_acq_trigger_en`

Sets/gets mapping of thresholded acquisition result to trigger network.

Properties:

value: Boolean

`(Cluster QRM) sequencer.thresholded_acq_trigger_address`

Sets/gets the trigger address to which the thresholded acquisition result is mapped to the trigger network (T1 to T15)

Properties:

value: Numbers 1<=v<=15

`(Cluster QRM) sequencer.thresholded_acq_trigger_invert`

Sets/gets the inversion of the thresholded acquistion result before it is mapped to the trigger network.

Properties:

value: Boolean

`(Cluster QRM) sequencer.ttl_acq_auto_bin_incr_en`

Sets/gets whether the bin index is automatically incremented when acquiring multiple triggers. Disabling the TTL trigger acquisition path resets the bin index.

Properties:

value: Boolean

`(Cluster QRM) sequencer.ttl_acq_threshold`

Sets/gets the threshold value with which to compare the input ADC values of the selected input path.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM) sequencer.ttl_acq_input_select`

Sets/gets the input used to compare against the threshold value in the TTL trigger acquisition path.

Properties:

value: Numbers 0<=v<=1

Cluster QRM-RF parameters

`(Cluster QRM-RF) sequencer.channel_map_path0_out0_en`

Sets/gets sequencer channel map enable of path 0 to output 0.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.channel_map_path1_out1_en`

Sets/gets sequencer channel map enable of path 1 to output 1.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.sync_en`

Sets/gets sequencer synchronization enable which enables party-line synchronization.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.nco_freq`

Sets/gets sequencer NCO frequency in Hz with a resolution of 0.25 Hz. Be aware that the outputs have low-pass filters with a cut-off frequency of 300 MHz

Properties:

unit: Hz

value: Numbers -500000000.0<=v<=500000000.0

`(Cluster QRM-RF) sequencer.nco_phase_offs`

Sets/gets sequencer NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QRM-RF) sequencer.nco_prop_delay_comp`

Sets/gets a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delay is applied on top of a default delay of 146 ns.

Properties:

unit: ns

value: Numbers -50<=v<=50

`(Cluster QRM-RF) sequencer.nco_prop_delay_comp_en`

Sets/gets the enable for a delay that compensates the NCO phase to the input path with respect to the instrument’s combined output and input propagation delay. This delays the frequency update as well.

Properties:

unit: ns

value: Boolean

`(Cluster QRM-RF) sequencer.marker_ovr_en`

Sets/gets sequencer marker override enable.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.marker_ovr_value`

Sets/gets sequencer marker override value. Bit index corresponds to marker channel index.

Properties:

value: Numbers 0<=v<=15

`(Cluster QRM-RF) sequencer.sequence`

Sets sequencer’s AWG waveforms, acquistion weights, acquisitions and Q1ASM program. Valid input is a string representing the JSON filename or a JSON compatible dictionary.

Properties:

value: MultiType: Strings, Dict

`(Cluster QRM-RF) sequencer.trigger1_count_threshold`

Sets/gets threshold for counter on trigger address T1. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger1_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 1.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger2_count_threshold`

Sets/gets threshold for counter on trigger address T2. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger2_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 2.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger3_count_threshold`

Sets/gets threshold for counter on trigger address T3. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger3_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 3.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger4_count_threshold`

Sets/gets threshold for counter on trigger address T4. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger4_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 4.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger5_count_threshold`

Sets/gets threshold for counter on trigger address T5. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger5_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 5.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger6_count_threshold`

Sets/gets threshold for counter on trigger address T6. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger6_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 6.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger7_count_threshold`

Sets/gets threshold for counter on trigger address T7. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger7_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 7.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger8_count_threshold`

Sets/gets threshold for counter on trigger address T8. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger8_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 8.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger9_count_threshold`

Sets/gets threshold for counter on trigger address T9. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger9_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 9.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger10_count_threshold`

Sets/gets threshold for counter on trigger address T10. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger10_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 10.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger11_count_threshold`

Sets/gets threshold for counter on trigger address T11. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger11_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 11.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger12_count_threshold`

Sets/gets threshold for counter on trigger address T12. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger12_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 12.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger13_count_threshold`

Sets/gets threshold for counter on trigger address T13. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger13_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 13.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger14_count_threshold`

Sets/gets threshold for counter on trigger address T14. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger14_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 14.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.trigger15_count_threshold`

Sets/gets threshold for counter on trigger address T15. Thresholding condition used: greater than or equal.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.trigger15_threshold_invert`

Sets/gets comparison result inversion for triggeraddress 15.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.cont_mode_en_awg_path0`

Sets/gets sequencer continous waveform mode enable for AWG path 0.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.cont_mode_waveform_idx_awg_path0`

Sets/gets sequencer continous waveform mode waveform index or AWG path 0.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QRM-RF) sequencer.upsample_rate_awg_path0`

Sets/gets sequencer upsample rate for AWG path 0.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.gain_awg_path0`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM-RF) sequencer.offset_awg_path0`

Sets/gets sequencer offset for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM-RF) sequencer.cont_mode_en_awg_path1`

Sets/gets sequencer continous waveform mode enable for AWG path 1.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.cont_mode_waveform_idx_awg_path1`

Sets/gets sequencer continous waveform mode waveform index or AWG path 1.

Properties:

value: Numbers 0<=v<=1023

`(Cluster QRM-RF) sequencer.upsample_rate_awg_path1`

Sets/gets sequencer upsample rate for AWG path 1.

Properties:

value: Numbers 0<=v<=65535

`(Cluster QRM-RF) sequencer.gain_awg_path1`

Sets/gets sequencer gain for AWG path 0.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM-RF) sequencer.offset_awg_path1`

Sets/gets sequencer offset for AWG path 1.

Properties:

value: Numbers -1.0<=v<=1.0

`(Cluster QRM-RF) sequencer.mixer_corr_phase_offset_degree`

Sets/gets sequencer mixer phase imbalance correction for AWG; applied to AWG path 1 relative to AWG path 0 and measured in degrees

Properties:

value: Numbers -45.0<=v<=45.0

`(Cluster QRM-RF) sequencer.mixer_corr_gain_ratio`

Sets/gets sequencer mixer gain imbalance correction for AWG; equal to AWG path 1 amplitude divided by AWG path 0 amplitude.

Properties:

value: Numbers 0.5<=v<=2.0

`(Cluster QRM-RF) sequencer.mod_en_awg`

Sets/gets sequencer modulation enable for AWG.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.demod_en_acq`

Sets/gets sequencer demodulation enable for acquisition.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.integration_length_acq`

Sets/gets sequencer integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties:

value: Numbers 4<=v<=16777212

`(Cluster QRM-RF) sequencer.thresholded_acq_rotation`

Sets/gets sequencer integration result phase rotation in degrees.

Properties:

unit: Degrees

value: Numbers 0<=v<=360

`(Cluster QRM-RF) sequencer.thresholded_acq_threshold`

Sets/gets sequencer discretization threshold for discretizing the phase rotation result. Discretization is done by comparing the threshold to the rotated integration result of path 0. This comparison is applied before normalization (i.e. division) of the rotated value with the integration length and therefore the threshold needs to be compensated (i.e. multiplied) with this length for the discretization to function properly.

Properties:

value: Numbers -16777212.0<=v<=16777212.0

`(Cluster QRM-RF) sequencer.thresholded_acq_marker_en`

Enable mapping of thresholded acquisition result to markers.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.thresholded_acq_marker_address`

Sets/gets the marker mask which maps the thresholded acquisition result to the markers (M1 to M4).

Properties:

value: Numbers 0<=v<=3

`(Cluster QRM-RF) sequencer.thresholded_acq_marker_invert`

Sets/gets inversion of the thresholded acquistion result before it is masked onto the markers.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.thresholded_acq_trigger_en`

Sets/gets mapping of thresholded acquisition result to trigger network.

Properties:

value: Boolean

`(Cluster QRM-RF) sequencer.thresholded_acq_trigger_address`

Sets/gets the trigger address to which the thresholded acquisition result is mapped to the trigger network (T1 to T15)

Properties:

value: Numbers 1<=v<=15

`(Cluster QRM-RF) sequencer.thresholded_acq_trigger_invert`

Sets/gets the inversion of the thresholded acquistion result before it is mapped to the trigger network.

Properties:

value: Boolean

Sequencer

Pulsar QCoDeS parameters

Pulsar QCM parameters

(Pulsar QCM) sequencer.channel_map_path0_out0_en

(Pulsar QCM) sequencer.channel_map_path1_out1_en

(Pulsar QCM) sequencer.channel_map_path0_out2_en

(Pulsar QCM) sequencer.channel_map_path1_out3_en

(Pulsar QCM) sequencer.sync_en

(Pulsar QCM) sequencer.nco_freq

(Pulsar QCM) sequencer.nco_phase_offs

(Pulsar QCM) sequencer.nco_prop_delay_comp

(Pulsar QCM) sequencer.nco_prop_delay_comp_en

(Pulsar QCM) sequencer.marker_ovr_en

(Pulsar QCM) sequencer.marker_ovr_value

(Pulsar QCM) sequencer.sequence

(Pulsar QCM) sequencer.trigger1_count_threshold

(Pulsar QCM) sequencer.trigger1_threshold_invert

(Pulsar QCM) sequencer.trigger2_count_threshold

(Pulsar QCM) sequencer.trigger2_threshold_invert

(Pulsar QCM) sequencer.trigger3_count_threshold

(Pulsar QCM) sequencer.trigger3_threshold_invert

(Pulsar QCM) sequencer.trigger4_count_threshold

(Pulsar QCM) sequencer.trigger4_threshold_invert

(Pulsar QCM) sequencer.trigger5_count_threshold

(Pulsar QCM) sequencer.trigger5_threshold_invert

(Pulsar QCM) sequencer.trigger6_count_threshold

(Pulsar QCM) sequencer.trigger6_threshold_invert

(Pulsar QCM) sequencer.trigger7_count_threshold

(Pulsar QCM) sequencer.trigger7_threshold_invert

(Pulsar QCM) sequencer.trigger8_count_threshold

(Pulsar QCM) sequencer.trigger8_threshold_invert

(Pulsar QCM) sequencer.trigger9_count_threshold

(Pulsar QCM) sequencer.trigger9_threshold_invert

(Pulsar QCM) sequencer.trigger10_count_threshold

(Pulsar QCM) sequencer.trigger10_threshold_invert

(Pulsar QCM) sequencer.trigger11_count_threshold

(Pulsar QCM) sequencer.trigger11_threshold_invert

(Pulsar QCM) sequencer.trigger12_count_threshold

(Pulsar QCM) sequencer.trigger12_threshold_invert

(Pulsar QCM) sequencer.trigger13_count_threshold

(Pulsar QCM) sequencer.trigger13_threshold_invert

(Pulsar QCM) sequencer.trigger14_count_threshold

(Pulsar QCM) sequencer.trigger14_threshold_invert

(Pulsar QCM) sequencer.trigger15_count_threshold

(Pulsar QCM) sequencer.trigger15_threshold_invert

(Pulsar QCM) sequencer.cont_mode_en_awg_path0

(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path0

(Pulsar QCM) sequencer.upsample_rate_awg_path0

(Pulsar QCM) sequencer.gain_awg_path0

(Pulsar QCM) sequencer.offset_awg_path0

(Pulsar QCM) sequencer.cont_mode_en_awg_path1

(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path1

(Pulsar QCM) sequencer.upsample_rate_awg_path1

(Pulsar QCM) sequencer.gain_awg_path1

(Pulsar QCM) sequencer.offset_awg_path1

(Pulsar QCM) sequencer.mixer_corr_phase_offset_degree

(Pulsar QCM) sequencer.mixer_corr_gain_ratio

(Pulsar QCM) sequencer.mod_en_awg

Pulsar QRM parameters

(Pulsar QRM) sequencer.channel_map_path0_out0_en

(Pulsar QRM) sequencer.channel_map_path1_out1_en

(Pulsar QRM) sequencer.sync_en

(Pulsar QRM) sequencer.nco_freq

(Pulsar QRM) sequencer.nco_phase_offs

(Pulsar QRM) sequencer.nco_prop_delay_comp

(Pulsar QRM) sequencer.nco_prop_delay_comp_en

(Pulsar QRM) sequencer.marker_ovr_en

(Pulsar QRM) sequencer.marker_ovr_value

(Pulsar QRM) sequencer.sequence

(Pulsar QRM) sequencer.trigger1_count_threshold

(Pulsar QRM) sequencer.trigger1_threshold_invert

(Pulsar QRM) sequencer.trigger2_count_threshold

(Pulsar QRM) sequencer.trigger2_threshold_invert

(Pulsar QRM) sequencer.trigger3_count_threshold

(Pulsar QRM) sequencer.trigger3_threshold_invert

(Pulsar QRM) sequencer.trigger4_count_threshold

(Pulsar QRM) sequencer.trigger4_threshold_invert

(Pulsar QRM) sequencer.trigger5_count_threshold

(Pulsar QRM) sequencer.trigger5_threshold_invert

(Pulsar QRM) sequencer.trigger6_count_threshold

`(Pulsar QCM) sequencer.channel_map_path0_out0_en`

`(Pulsar QCM) sequencer.channel_map_path1_out1_en`

`(Pulsar QCM) sequencer.channel_map_path0_out2_en`

`(Pulsar QCM) sequencer.channel_map_path1_out3_en`

`(Pulsar QCM) sequencer.sync_en`

`(Pulsar QCM) sequencer.nco_freq`

`(Pulsar QCM) sequencer.nco_phase_offs`

`(Pulsar QCM) sequencer.nco_prop_delay_comp`

`(Pulsar QCM) sequencer.nco_prop_delay_comp_en`

`(Pulsar QCM) sequencer.marker_ovr_en`

`(Pulsar QCM) sequencer.marker_ovr_value`

`(Pulsar QCM) sequencer.sequence`

`(Pulsar QCM) sequencer.trigger1_count_threshold`

`(Pulsar QCM) sequencer.trigger1_threshold_invert`

`(Pulsar QCM) sequencer.trigger2_count_threshold`

`(Pulsar QCM) sequencer.trigger2_threshold_invert`

`(Pulsar QCM) sequencer.trigger3_count_threshold`

`(Pulsar QCM) sequencer.trigger3_threshold_invert`

`(Pulsar QCM) sequencer.trigger4_count_threshold`

`(Pulsar QCM) sequencer.trigger4_threshold_invert`

`(Pulsar QCM) sequencer.trigger5_count_threshold`

`(Pulsar QCM) sequencer.trigger5_threshold_invert`

`(Pulsar QCM) sequencer.trigger6_count_threshold`

`(Pulsar QCM) sequencer.trigger6_threshold_invert`

`(Pulsar QCM) sequencer.trigger7_count_threshold`

`(Pulsar QCM) sequencer.trigger7_threshold_invert`

`(Pulsar QCM) sequencer.trigger8_count_threshold`

`(Pulsar QCM) sequencer.trigger8_threshold_invert`

`(Pulsar QCM) sequencer.trigger9_count_threshold`

`(Pulsar QCM) sequencer.trigger9_threshold_invert`

`(Pulsar QCM) sequencer.trigger10_count_threshold`

`(Pulsar QCM) sequencer.trigger10_threshold_invert`

`(Pulsar QCM) sequencer.trigger11_count_threshold`

`(Pulsar QCM) sequencer.trigger11_threshold_invert`

`(Pulsar QCM) sequencer.trigger12_count_threshold`

`(Pulsar QCM) sequencer.trigger12_threshold_invert`

`(Pulsar QCM) sequencer.trigger13_count_threshold`

`(Pulsar QCM) sequencer.trigger13_threshold_invert`

`(Pulsar QCM) sequencer.trigger14_count_threshold`

`(Pulsar QCM) sequencer.trigger14_threshold_invert`

`(Pulsar QCM) sequencer.trigger15_count_threshold`

`(Pulsar QCM) sequencer.trigger15_threshold_invert`

`(Pulsar QCM) sequencer.cont_mode_en_awg_path0`

`(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path0`

`(Pulsar QCM) sequencer.upsample_rate_awg_path0`

`(Pulsar QCM) sequencer.gain_awg_path0`

`(Pulsar QCM) sequencer.offset_awg_path0`

`(Pulsar QCM) sequencer.cont_mode_en_awg_path1`

`(Pulsar QCM) sequencer.cont_mode_waveform_idx_awg_path1`

`(Pulsar QCM) sequencer.upsample_rate_awg_path1`

`(Pulsar QCM) sequencer.gain_awg_path1`

`(Pulsar QCM) sequencer.offset_awg_path1`

`(Pulsar QCM) sequencer.mixer_corr_phase_offset_degree`

`(Pulsar QCM) sequencer.mixer_corr_gain_ratio`

`(Pulsar QCM) sequencer.mod_en_awg`

`(Pulsar QRM) sequencer.channel_map_path0_out0_en`

`(Pulsar QRM) sequencer.channel_map_path1_out1_en`

`(Pulsar QRM) sequencer.sync_en`

`(Pulsar QRM) sequencer.nco_freq`

`(Pulsar QRM) sequencer.nco_phase_offs`

`(Pulsar QRM) sequencer.nco_prop_delay_comp`

`(Pulsar QRM) sequencer.nco_prop_delay_comp_en`

`(Pulsar QRM) sequencer.marker_ovr_en`

`(Pulsar QRM) sequencer.marker_ovr_value`

`(Pulsar QRM) sequencer.sequence`

`(Pulsar QRM) sequencer.trigger1_count_threshold`

`(Pulsar QRM) sequencer.trigger1_threshold_invert`

`(Pulsar QRM) sequencer.trigger2_count_threshold`

`(Pulsar QRM) sequencer.trigger2_threshold_invert`

`(Pulsar QRM) sequencer.trigger3_count_threshold`

`(Pulsar QRM) sequencer.trigger3_threshold_invert`

`(Pulsar QRM) sequencer.trigger4_count_threshold`

`(Pulsar QRM) sequencer.trigger4_threshold_invert`

`(Pulsar QRM) sequencer.trigger5_count_threshold`

`(Pulsar QRM) sequencer.trigger5_threshold_invert`

`(Pulsar QRM) sequencer.trigger6_count_threshold`

`(Pulsar QRM) sequencer.trigger6_threshold_invert`

`(Pulsar QRM) sequencer.trigger7_count_threshold`

`(Pulsar QRM) sequencer.trigger7_threshold_invert`

`(Pulsar QRM) sequencer.trigger8_count_threshold`