{ "cells": [ { "cell_type": "markdown", "id": "e0368e21", "metadata": {}, "source": [ "# Resonator Flux Spectroscopy\n", "For flux tunable qubits, the resonance frequency of the readout resonator depends on the flux.\n", "This can be used as a rough measure to find the sweetspot." ] }, { "cell_type": "code", "execution_count": 1, "id": "117dbe3e", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:57:59.650450Z", "iopub.status.busy": "2024-09-18T14:57:59.650244Z", "iopub.status.idle": "2024-09-18T14:58:01.255812Z", "shell.execute_reply": "2024-09-18T14:58:01.255016Z" }, "title": "HEADER" }, "outputs": [], "source": [ "\n", "from __future__ import annotations\n", "\n", "import json\n", "\n", "import numpy as np\n", "import rich # noqa:F401\n", "from qcodes.instrument import find_or_create_instrument\n", "from qcodes.parameters import ManualParameter\n", "\n", "import quantify_core.data.handling as dh\n", "from qblox_instruments import Cluster, ClusterType\n", "from quantify_core.measurement.control import MeasurementControl\n", "from quantify_core.visualization.pyqt_plotmon import PlotMonitor_pyqt as PlotMonitor\n", "from quantify_scheduler import Schedule\n", "from quantify_scheduler.device_under_test.quantum_device import QuantumDevice\n", "from quantify_scheduler.gettables import ScheduleGettable\n", "from quantify_scheduler.instrument_coordinator import InstrumentCoordinator\n", "from quantify_scheduler.instrument_coordinator.components.qblox import (\n", " ClusterComponent,\n", ")\n", "from quantify_scheduler.operations.gate_library import Measure\n", "from quantify_scheduler.operations.pulse_library import IdlePulse" ] }, { "cell_type": "markdown", "id": "f62a0d9d", "metadata": {}, "source": [ "## Setup\n", "In this section we configure the hardware configuration which specifies the connectivity of our system.\n", "\n", "The experiments of this tutorial are meant to be executed with a Qblox Cluster controlling a transmon system.\n", "The experiments can also be executed using a dummy Qblox device that is created via an instance of the `Cluster` class, and is initialized with a dummy configuration.\n", "When using a dummy device, the analysis will not work because the experiments will return `np.nan` values.\n", "\n", "### Configuration file\n", "\n", "This is a template hardware configuration file for a 2-qubit system with a flux-control line which can be used to tune the qubit frequency. We will only work with qubit 0.\n", "\n", "The hardware setup is as follows, by cluster slot:\n", "- **QCM** (Slot 2)\n", " - Flux line for `q0`.\n", "- **QCM-RF** (Slot 6)\n", " - Drive line for `q0` using fixed 80 MHz IF.\n", "- **QRM-RF** (Slot 8)\n", " - Readout line for `q0` using a fixed LO set at 7.5 GHz.\n", "\n", "Note that in the hardware configuration below the mixers are uncorrected, but for high fidelity experiments this should also be done for all the modules." ] }, { "cell_type": "code", "execution_count": 2, "id": "10a647f5", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:01.258574Z", "iopub.status.busy": "2024-09-18T14:58:01.258108Z", "iopub.status.idle": "2024-09-18T14:58:01.262517Z", "shell.execute_reply": "2024-09-18T14:58:01.261880Z" } }, "outputs": [ { "name": "stdout", "output_type": "stream", "text": [ "Data will be saved in:\n", "/root/quantify-data\n" ] } ], "source": [ "with open(\"configs/tuning_transmon_coupled_pair_hardware_config.json\") as hw_cfg_json_file:\n", " hardware_cfg = json.load(hw_cfg_json_file)\n", "\n", "# Enter your own dataset directory here!\n", "dh.set_datadir(dh.default_datadir())" ] }, { "cell_type": "markdown", "id": "8c4aff32", "metadata": {}, "source": [ "### Scan For Clusters\n", "\n", "We scan for the available devices connected via ethernet using the Plug & Play functionality of the Qblox Instruments package (see [Plug & Play](https://qblox-qblox-instruments.readthedocs-hosted.com/en/main/api_reference/tools.html#api-pnp) for more info)." ] }, { "cell_type": "code", "execution_count": 3, "id": "96b46aff", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:01.264413Z", "iopub.status.busy": "2024-09-18T14:58:01.264159Z", "iopub.status.idle": "2024-09-18T14:58:03.260480Z", "shell.execute_reply": "2024-09-18T14:58:03.256373Z" } }, "outputs": [ { "name": "stdout", "output_type": "stream", "text": [ "No devices found\r\n" ] } ], "source": [ "!qblox-pnp list" ] }, { "cell_type": "code", "execution_count": 4, "id": "ceed5f70", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.267659Z", "iopub.status.busy": "2024-09-18T14:58:03.267430Z", "iopub.status.idle": "2024-09-18T14:58:03.270940Z", "shell.execute_reply": "2024-09-18T14:58:03.270258Z" } }, "outputs": [], "source": [ "cluster_ip = None # To run this tutorial on hardware, fill in the IP address of the cluster here\n", "cluster_name = \"cluster0\"" ] }, { "cell_type": "markdown", "id": "cb87684c", "metadata": {}, "source": [ "### Connect to Cluster\n", "\n", "We now make a connection with the Cluster." ] }, { "cell_type": "code", "execution_count": 5, "id": "e0533556", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.272868Z", "iopub.status.busy": "2024-09-18T14:58:03.272691Z", "iopub.status.idle": "2024-09-18T14:58:03.896933Z", "shell.execute_reply": "2024-09-18T14:58:03.896207Z" }, "lines_to_next_cell": 0 }, "outputs": [], "source": [ "cluster = find_or_create_instrument(\n", " Cluster,\n", " recreate=True,\n", " name=cluster_name,\n", " identifier=cluster_ip,\n", " dummy_cfg=(\n", " {\n", " 2: ClusterType.CLUSTER_QCM,\n", " 4: ClusterType.CLUSTER_QRM,\n", " 6: ClusterType.CLUSTER_QCM_RF,\n", " 8: ClusterType.CLUSTER_QRM_RF,\n", " }\n", " if cluster_ip is None\n", " else None\n", " ),\n", ")" ] }, { "cell_type": "markdown", "id": "ba389dd6", "metadata": {}, "source": [ "### Quantum device settings\n", "Here we initialize our `QuantumDevice` and our qubit parameters, checkout this [tutorial](https://quantify-os.org/docs/quantify-scheduler/tutorials/Operations%20and%20Qubits.html) for further details.\n", "\n", "In short, a `QuantumDevice` contains device elements where we save our found parameters. Here we are loading a template for 2 qubits, but we will only use qubit 0." ] }, { "cell_type": "code", "execution_count": 6, "id": "b01d4792", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.899196Z", "iopub.status.busy": "2024-09-18T14:58:03.898991Z", "iopub.status.idle": "2024-09-18T14:58:03.910633Z", "shell.execute_reply": "2024-09-18T14:58:03.910114Z" } }, "outputs": [], "source": [ "quantum_device = QuantumDevice.from_json_file(\"devices/transmon_device_2q.json\")\n", "qubit = quantum_device.get_element(\"q0\")\n", "quantum_device.hardware_config(hardware_cfg)" ] }, { "cell_type": "markdown", "id": "8476d607", "metadata": { "lines_to_next_cell": 2 }, "source": [ "### Configure measurement control loop\n", "We will use a `MeasurementControl` object for data acquisition as well as an `InstrumentCoordinator` for controlling the instruments in our setup.\n", "\n", "The `PlotMonitor` is used for live plotting.\n", "\n", "All of these are then associated with the `QuantumDevice`." ] }, { "cell_type": "code", "execution_count": 7, "id": "0278ebe8", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.912632Z", "iopub.status.busy": "2024-09-18T14:58:03.912434Z", "iopub.status.idle": "2024-09-18T14:58:03.919635Z", "shell.execute_reply": "2024-09-18T14:58:03.918944Z" }, "lines_to_next_cell": 2 }, "outputs": [], "source": [ "def configure_measurement_control_loop(\n", " device: QuantumDevice, cluster: Cluster, live_plotting: bool = False\n", ") -> tuple[MeasurementControl, InstrumentCoordinator]:\n", " meas_ctrl = find_or_create_instrument(MeasurementControl, recreate=True, name=\"meas_ctrl\")\n", " ic = find_or_create_instrument(InstrumentCoordinator, recreate=True, name=\"ic\")\n", "\n", " # Add cluster to instrument coordinator\n", " ic_cluster = ClusterComponent(cluster)\n", " ic.add_component(ic_cluster)\n", "\n", " if live_plotting:\n", " # Associate plot monitor with measurement controller\n", " plotmon = find_or_create_instrument(PlotMonitor, recreate=False, name=\"PlotMonitor\")\n", " meas_ctrl.instr_plotmon(plotmon.name)\n", "\n", " # Associate measurement controller and instrument coordinator with the quantum device\n", " device.instr_measurement_control(meas_ctrl.name)\n", " device.instr_instrument_coordinator(ic.name)\n", "\n", " return (meas_ctrl, ic)\n", "\n", "\n", "meas_ctrl, instrument_coordinator = configure_measurement_control_loop(quantum_device, cluster)" ] }, { "cell_type": "markdown", "id": "1d78f0ae", "metadata": {}, "source": [ "## Configure external flux control\n", "In the case of flux-tunable transmon qubits, we need to have some way of controlling the external flux.\n", "This can be done by setting an output bias on a module of the cluster which is then connected to the flux line.\n", "If your system is not using flux-tunable transmons, then you can skip to the next section." ] }, { "cell_type": "code", "execution_count": 8, "id": "33e5af3f", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.921462Z", "iopub.status.busy": "2024-09-18T14:58:03.921269Z", "iopub.status.idle": "2024-09-18T14:58:03.925515Z", "shell.execute_reply": "2024-09-18T14:58:03.924863Z" }, "lines_to_next_cell": 2 }, "outputs": [], "source": [ "flux_settable: callable = cluster.module2.out0_offset\n", "flux_settable.inter_delay = 100e-9 # Delay time in seconds between consecutive set operations.\n", "flux_settable.step = 0.3e-3 # Stepsize in V that this Parameter uses during set operation.\n", "flux_settable() # Get before setting to avoid jumps.\n", "flux_settable(0.0)" ] }, { "cell_type": "markdown", "id": "dcbe51e4", "metadata": { "lines_to_next_cell": 2, "title": "BODY" }, "source": [ "## Resonator Flux Spectroscopy" ] }, { "cell_type": "code", "execution_count": 9, "id": "6a731ccd", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.927420Z", "iopub.status.busy": "2024-09-18T14:58:03.927167Z", "iopub.status.idle": "2024-09-18T14:58:03.932599Z", "shell.execute_reply": "2024-09-18T14:58:03.931948Z" }, "lines_to_next_cell": 0 }, "outputs": [], "source": [ "def resonator_spectroscopy_schedule(\n", " qubit, freqs: np.array, repetitions: int = 1 # noqa: ANN001\n", ") -> Schedule:\n", " \"\"\"Schedule to sweep the resonator frequency.\"\"\"\n", " sched = Schedule(\"schedule\", repetitions=repetitions)\n", " for i, freq in enumerate(freqs):\n", " sched.add(\n", " Measure(\n", " qubit.name,\n", " acq_index=i,\n", " freq=freq,\n", " )\n", " )\n", " sched.add(IdlePulse(8e-9))\n", " return sched\n", "\n", "\n", "freqs = ManualParameter(name=\"freq\", unit=\"Hz\", label=\"Frequency\")\n", "freqs.batched = True\n", "freqs.batch_size = 100\n", "\n", "spec_sched_kwargs = dict(\n", " qubit=qubit,\n", " freqs=freqs,\n", ")\n", "gettable = ScheduleGettable(\n", " quantum_device,\n", " schedule_function=resonator_spectroscopy_schedule,\n", " schedule_kwargs=spec_sched_kwargs,\n", " real_imag=False,\n", " batched=True,\n", ")\n", "\n", "meas_ctrl.gettables(gettable)" ] }, { "cell_type": "code", "execution_count": 10, "id": "dace40aa", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:03.934297Z", "iopub.status.busy": "2024-09-18T14:58:03.934103Z", "iopub.status.idle": "2024-09-18T14:58:05.828000Z", "shell.execute_reply": "2024-09-18T14:58:05.827235Z" } }, "outputs": [ { "name": "stdout", "output_type": "stream", "text": [ "Starting batched measurement...\n", "Iterative settable(s) [outer loop(s)]:\n", "\t out0_offset \n", "Batched settable(s):\n", "\t freq \n", "Batch size limit: 100\n", "\n" ] }, { "name": "stderr", "output_type": "stream", "text": [ "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1220: ValidationWarning: Setting `auto_lo_cal=on_lo_interm_freq_change` will overwrite settings `dc_offset_i=0.0` and `dc_offset_q=0.0`. To suppress this warning, do not set either `dc_offset_i` or `dc_offset_q` for this port-clock.\n", " warnings.warn(\n", "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n", "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n" ] }, { "data": { "application/vnd.jupyter.widget-view+json": { "model_id": "184d5f135f3342e191f5b2bf45f38844", "version_major": 2, "version_minor": 0 }, "text/plain": [ "Completed: 0%| [ elapsed time: 00:00 | time left: ? ] it" ] }, "metadata": {}, "output_type": "display_data" }, { "name": "stderr", "output_type": "stream", "text": [ "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n", "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n" ] }, { "name": "stderr", "output_type": "stream", "text": [ "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n", "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n" ] }, { "name": "stderr", "output_type": "stream", "text": [ "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n", "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n" ] }, { "name": "stderr", "output_type": "stream", "text": [ "/usr/local/lib/python3.9/site-packages/quantify_scheduler/backends/types/qblox.py:1235: ValidationWarning: Setting `auto_sideband_cal=on_interm_freq_change` will overwrite settings `amp_ratio=1.0` and `phase_error=0.0`. To suppress this warning, do not set either `amp_ratio` or `phase_error` for this port-clock.\n", " warnings.warn(\n" ] }, { "data": { "text/html": [ "
\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "\n", "
<xarray.Dataset> Size: 29kB\n",
       "Dimensions:  (dim_0: 900)\n",
       "Coordinates:\n",
       "    x0       (dim_0) float64 7kB 7.68e+09 7.68e+09 ... 7.72e+09 7.72e+09\n",
       "    x1       (dim_0) float64 7kB 0.0 0.0 0.0 0.0 0.0 0.0 ... 1.0 1.0 1.0 1.0 1.0\n",
       "Dimensions without coordinates: dim_0\n",
       "Data variables:\n",
       "    y0       (dim_0) float64 7kB nan nan nan nan nan nan ... nan nan nan nan nan\n",
       "    y1       (dim_0) float64 7kB nan nan nan nan nan nan ... nan nan nan nan nan\n",
       "Attributes:\n",
       "    tuid:                             20240918-145803-937-a3bb7f\n",
       "    name:                             resonator flux spectroscopy\n",
       "    grid_2d:                          True\n",
       "    grid_2d_uniformly_spaced:         True\n",
       "    1d_2_settables_uniformly_spaced:  False\n",
       "    xlen:                             300\n",
       "    ylen:                             3
" ], "text/plain": [ " Size: 29kB\n", "Dimensions: (dim_0: 900)\n", "Coordinates:\n", " x0 (dim_0) float64 7kB 7.68e+09 7.68e+09 ... 7.72e+09 7.72e+09\n", " x1 (dim_0) float64 7kB 0.0 0.0 0.0 0.0 0.0 0.0 ... 1.0 1.0 1.0 1.0 1.0\n", "Dimensions without coordinates: dim_0\n", "Data variables:\n", " y0 (dim_0) float64 7kB nan nan nan nan nan nan ... nan nan nan nan nan\n", " y1 (dim_0) float64 7kB nan nan nan nan nan nan ... nan nan nan nan nan\n", "Attributes:\n", " tuid: 20240918-145803-937-a3bb7f\n", " name: resonator flux spectroscopy\n", " grid_2d: True\n", " grid_2d_uniformly_spaced: True\n", " 1d_2_settables_uniformly_spaced: False\n", " xlen: 300\n", " ylen: 3" ] }, "execution_count": 10, "metadata": {}, "output_type": "execute_result" } ], "source": [ "quantum_device.cfg_sched_repetitions(80)\n", "center = 7.7e9\n", "frequency_setpoints = np.linspace(center - 20e6, center + 20e6, 300)\n", "flux_setpoints = np.linspace(0, 1, 3)\n", "meas_ctrl.settables([freqs, flux_settable])\n", "meas_ctrl.setpoints_grid((frequency_setpoints, flux_setpoints))\n", "\n", "rfs_ds = meas_ctrl.run(\"resonator flux spectroscopy\")\n", "rfs_ds" ] }, { "cell_type": "markdown", "id": "a1031964", "metadata": {}, "source": [ "[![analysis7](figures/rfs.svg)](figures/rfs.svg)" ] }, { "cell_type": "code", "execution_count": 11, "id": "27636099", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:05.830091Z", "iopub.status.busy": "2024-09-18T14:58:05.829900Z", "iopub.status.idle": "2024-09-18T14:58:05.867266Z", "shell.execute_reply": "2024-09-18T14:58:05.866588Z" } }, "outputs": [ { "data": { "text/html": [ "
{\n",
       "    'config_type': 'quantify_scheduler.backends.qblox_backend.QbloxHardwareCompilationConfig',\n",
       "    'hardware_description': {\n",
       "        'cluster0': {\n",
       "            'instrument_type': 'Cluster',\n",
       "            'modules': {\n",
       "                '6': {'instrument_type': 'QCM_RF'},\n",
       "                '2': {'instrument_type': 'QCM'},\n",
       "                '8': {'instrument_type': 'QRM_RF'}\n",
       "            },\n",
       "            'sequence_to_file': False,\n",
       "            'ref': 'internal'\n",
       "        }\n",
       "    },\n",
       "    'hardware_options': {\n",
       "        'output_att': {'q0:mw-q0.01': 10, 'q1:mw-q1.01': 10, 'q0:res-q0.ro': 60, 'q1:res-q1.ro': 60},\n",
       "        'mixer_corrections': {\n",
       "            'q0:mw-q0.01': {\n",
       "                'auto_lo_cal': 'on_lo_interm_freq_change',\n",
       "                'auto_sideband_cal': 'on_interm_freq_change',\n",
       "                'dc_offset_i': None,\n",
       "                'dc_offset_q': None,\n",
       "                'amp_ratio': 1.0,\n",
       "                'phase_error': 0.0\n",
       "            },\n",
       "            'q1:mw-q1.01': {\n",
       "                'auto_lo_cal': 'on_lo_interm_freq_change',\n",
       "                'auto_sideband_cal': 'on_interm_freq_change',\n",
       "                'dc_offset_i': None,\n",
       "                'dc_offset_q': None,\n",
       "                'amp_ratio': 1.0,\n",
       "                'phase_error': 0.0\n",
       "            },\n",
       "            'q0:res-q0.ro': {\n",
       "                'auto_lo_cal': 'on_lo_interm_freq_change',\n",
       "                'auto_sideband_cal': 'on_interm_freq_change',\n",
       "                'dc_offset_i': None,\n",
       "                'dc_offset_q': None,\n",
       "                'amp_ratio': 1.0,\n",
       "                'phase_error': 0.0\n",
       "            },\n",
       "            'q1:res-q1.ro': {\n",
       "                'auto_lo_cal': 'on_lo_interm_freq_change',\n",
       "                'auto_sideband_cal': 'on_interm_freq_change',\n",
       "                'dc_offset_i': None,\n",
       "                'dc_offset_q': None,\n",
       "                'amp_ratio': 1.0,\n",
       "                'phase_error': 0.0\n",
       "            }\n",
       "        },\n",
       "        'modulation_frequencies': {\n",
       "            'q0:mw-q0.01': {'interm_freq': 80000000.0},\n",
       "            'q1:mw-q1.01': {'interm_freq': 80000000.0},\n",
       "            'q0:res-q0.ro': {'lo_freq': 7500000000.0},\n",
       "            'q1:res-q1.ro': {'lo_freq': 7500000000.0}\n",
       "        }\n",
       "    },\n",
       "    'connectivity': {\n",
       "        'graph': [\n",
       "            ['cluster0.module6.complex_output_0', 'q0:mw'],\n",
       "            ['cluster0.module6.complex_output_1', 'q1:mw'],\n",
       "            ['cluster0.module2.real_output_0', 'q0:fl'],\n",
       "            ['cluster0.module2.real_output_1', 'q1:fl'],\n",
       "            ['cluster0.module8.complex_output_0', 'q0:res'],\n",
       "            ['cluster0.module8.complex_output_0', 'q1:res']\n",
       "        ]\n",
       "    }\n",
       "}\n",
       "
\n" ], "text/plain": [ "\u001b[1m{\u001b[0m\n", " \u001b[32m'config_type'\u001b[0m: \u001b[32m'quantify_scheduler.backends.qblox_backend.QbloxHardwareCompilationConfig'\u001b[0m,\n", " \u001b[32m'hardware_description'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'cluster0'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'instrument_type'\u001b[0m: \u001b[32m'Cluster'\u001b[0m,\n", " \u001b[32m'modules'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'6'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'instrument_type'\u001b[0m: \u001b[32m'QCM_RF'\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'2'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'instrument_type'\u001b[0m: \u001b[32m'QCM'\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'8'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'instrument_type'\u001b[0m: \u001b[32m'QRM_RF'\u001b[0m\u001b[1m}\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'sequence_to_file'\u001b[0m: \u001b[3;91mFalse\u001b[0m,\n", " \u001b[32m'ref'\u001b[0m: \u001b[32m'internal'\u001b[0m\n", " \u001b[1m}\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'hardware_options'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'output_att'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'q0:mw-q0.01'\u001b[0m: \u001b[1;36m10\u001b[0m, \u001b[32m'q1:mw-q1.01'\u001b[0m: \u001b[1;36m10\u001b[0m, \u001b[32m'q0:res-q0.ro'\u001b[0m: \u001b[1;36m60\u001b[0m, \u001b[32m'q1:res-q1.ro'\u001b[0m: \u001b[1;36m60\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'mixer_corrections'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'q0:mw-q0.01'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'auto_lo_cal'\u001b[0m: \u001b[32m'on_lo_interm_freq_change'\u001b[0m,\n", " \u001b[32m'auto_sideband_cal'\u001b[0m: \u001b[32m'on_interm_freq_change'\u001b[0m,\n", " \u001b[32m'dc_offset_i'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'dc_offset_q'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'amp_ratio'\u001b[0m: \u001b[1;36m1.0\u001b[0m,\n", " \u001b[32m'phase_error'\u001b[0m: \u001b[1;36m0.0\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'q1:mw-q1.01'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'auto_lo_cal'\u001b[0m: \u001b[32m'on_lo_interm_freq_change'\u001b[0m,\n", " \u001b[32m'auto_sideband_cal'\u001b[0m: \u001b[32m'on_interm_freq_change'\u001b[0m,\n", " \u001b[32m'dc_offset_i'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'dc_offset_q'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'amp_ratio'\u001b[0m: \u001b[1;36m1.0\u001b[0m,\n", " \u001b[32m'phase_error'\u001b[0m: \u001b[1;36m0.0\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'q0:res-q0.ro'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'auto_lo_cal'\u001b[0m: \u001b[32m'on_lo_interm_freq_change'\u001b[0m,\n", " \u001b[32m'auto_sideband_cal'\u001b[0m: \u001b[32m'on_interm_freq_change'\u001b[0m,\n", " \u001b[32m'dc_offset_i'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'dc_offset_q'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'amp_ratio'\u001b[0m: \u001b[1;36m1.0\u001b[0m,\n", " \u001b[32m'phase_error'\u001b[0m: \u001b[1;36m0.0\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'q1:res-q1.ro'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'auto_lo_cal'\u001b[0m: \u001b[32m'on_lo_interm_freq_change'\u001b[0m,\n", " \u001b[32m'auto_sideband_cal'\u001b[0m: \u001b[32m'on_interm_freq_change'\u001b[0m,\n", " \u001b[32m'dc_offset_i'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'dc_offset_q'\u001b[0m: \u001b[3;35mNone\u001b[0m,\n", " \u001b[32m'amp_ratio'\u001b[0m: \u001b[1;36m1.0\u001b[0m,\n", " \u001b[32m'phase_error'\u001b[0m: \u001b[1;36m0.0\u001b[0m\n", " \u001b[1m}\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'modulation_frequencies'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'q0:mw-q0.01'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'interm_freq'\u001b[0m: \u001b[1;36m80000000.0\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'q1:mw-q1.01'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'interm_freq'\u001b[0m: \u001b[1;36m80000000.0\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'q0:res-q0.ro'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'lo_freq'\u001b[0m: \u001b[1;36m7500000000.0\u001b[0m\u001b[1m}\u001b[0m,\n", " \u001b[32m'q1:res-q1.ro'\u001b[0m: \u001b[1m{\u001b[0m\u001b[32m'lo_freq'\u001b[0m: \u001b[1;36m7500000000.0\u001b[0m\u001b[1m}\u001b[0m\n", " \u001b[1m}\u001b[0m\n", " \u001b[1m}\u001b[0m,\n", " \u001b[32m'connectivity'\u001b[0m: \u001b[1m{\u001b[0m\n", " \u001b[32m'graph'\u001b[0m: \u001b[1m[\u001b[0m\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module6.complex_output_0'\u001b[0m, \u001b[32m'q0:mw'\u001b[0m\u001b[1m]\u001b[0m,\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module6.complex_output_1'\u001b[0m, \u001b[32m'q1:mw'\u001b[0m\u001b[1m]\u001b[0m,\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module2.real_output_0'\u001b[0m, \u001b[32m'q0:fl'\u001b[0m\u001b[1m]\u001b[0m,\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module2.real_output_1'\u001b[0m, \u001b[32m'q1:fl'\u001b[0m\u001b[1m]\u001b[0m,\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module8.complex_output_0'\u001b[0m, \u001b[32m'q0:res'\u001b[0m\u001b[1m]\u001b[0m,\n", " \u001b[1m[\u001b[0m\u001b[32m'cluster0.module8.complex_output_0'\u001b[0m, \u001b[32m'q1:res'\u001b[0m\u001b[1m]\u001b[0m\n", " \u001b[1m]\u001b[0m\n", " \u001b[1m}\u001b[0m\n", "\u001b[1m}\u001b[0m\n" ] }, "metadata": {}, "output_type": "display_data" } ], "source": [ "\n", "\n", "rich.print(quantum_device.hardware_config())" ] }, { "cell_type": "code", "execution_count": 12, "id": "0342fd20", "metadata": { "execution": { "iopub.execute_input": "2024-09-18T14:58:05.869257Z", "iopub.status.busy": "2024-09-18T14:58:05.869076Z", "iopub.status.idle": "2024-09-18T14:58:05.875064Z", "shell.execute_reply": "2024-09-18T14:58:05.874384Z" } }, "outputs": [ { "data": { "text/plain": [ "'devices/device_2q_2024-09-18_14-58-05_UTC.json'" ] }, "execution_count": 12, "metadata": {}, "output_type": "execute_result" } ], "source": [ "quantum_device.to_json_file(\"devices/\")" ] } ], "metadata": { "files_to_bundle_in_zip_file": [ "figures/rfs.svg", "configs/tuning_transmon_coupled_pair_hardware_config.json", "devices/transmon_device_2q.json" ], "jupytext": { "main_language": "python", "notebook_metadata_filter": "files_to_bundle_in_zip_file" }, "language_info": { "codemirror_mode": { "name": "ipython", "version": 3 }, "file_extension": ".py", "mimetype": "text/x-python", "name": "python", "nbconvert_exporter": "python", "pygments_lexer": "ipython3", "version": "3.9.20" }, "widgets": { "application/vnd.jupyter.widget-state+json": { "state": { "10060738b8a946379611d74cd10b7f26": { "model_module": "@jupyter-widgets/base", "model_module_version": "2.0.0", "model_name": "LayoutModel", "state": { "_model_module": "@jupyter-widgets/base", "_model_module_version": "2.0.0", "_model_name": "LayoutModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "LayoutView", "align_content": null, "align_items": null, "align_self": null, "border_bottom": null, "border_left": null, "border_right": null, "border_top": null, "bottom": null, "display": null, "flex": null, "flex_flow": null, "grid_area": null, "grid_auto_columns": null, "grid_auto_flow": null, "grid_auto_rows": null, "grid_column": null, "grid_gap": null, "grid_row": null, "grid_template_areas": null, "grid_template_columns": null, "grid_template_rows": null, "height": null, "justify_content": null, "justify_items": null, "left": null, "margin": null, "max_height": null, "max_width": null, "min_height": null, "min_width": null, "object_fit": null, "object_position": null, "order": null, "overflow": null, "padding": null, "right": null, "top": null, "visibility": null, "width": null } }, "184d5f135f3342e191f5b2bf45f38844": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "HBoxModel", "state": { "_dom_classes": [], "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "HBoxModel", "_view_count": null, "_view_module": "@jupyter-widgets/controls", "_view_module_version": "2.0.0", "_view_name": "HBoxView", "box_style": "", "children": [ "IPY_MODEL_c7a4db9911f84d1f877656e453e56ee2", "IPY_MODEL_7062840fbc00491fb50ddeb6f80dd762", "IPY_MODEL_65816149a3304a32937994aa37a4f91d" ], "layout": "IPY_MODEL_10060738b8a946379611d74cd10b7f26", "tabbable": null, "tooltip": null } }, "39212a61d44c4557b8863ab494b8bd3d": { "model_module": "@jupyter-widgets/base", "model_module_version": "2.0.0", "model_name": "LayoutModel", "state": { "_model_module": "@jupyter-widgets/base", "_model_module_version": "2.0.0", "_model_name": "LayoutModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "LayoutView", "align_content": null, "align_items": null, "align_self": null, "border_bottom": null, "border_left": null, "border_right": null, "border_top": null, "bottom": null, "display": null, "flex": null, "flex_flow": null, "grid_area": null, "grid_auto_columns": null, "grid_auto_flow": null, "grid_auto_rows": null, "grid_column": null, "grid_gap": null, "grid_row": null, "grid_template_areas": null, "grid_template_columns": null, "grid_template_rows": null, "height": null, "justify_content": null, "justify_items": null, "left": null, "margin": null, "max_height": null, "max_width": null, "min_height": null, "min_width": null, "object_fit": null, "object_position": null, "order": null, "overflow": null, "padding": null, "right": null, "top": null, "visibility": null, "width": null } }, "5ccf3c0619cd442eb25cd6f405297c23": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "HTMLStyleModel", "state": { "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "HTMLStyleModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "StyleView", "background": null, "description_width": "", "font_size": null, "text_color": null } }, "65816149a3304a32937994aa37a4f91d": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "HTMLModel", "state": { "_dom_classes": [], "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "HTMLModel", "_view_count": null, "_view_module": "@jupyter-widgets/controls", "_view_module_version": "2.0.0", "_view_name": "HTMLView", "description": "", "description_allow_html": false, "layout": "IPY_MODEL_8fda1003862e449b96ed9954b7a63ac0", "placeholder": "​", "style": "IPY_MODEL_7bbad4a6008642249d648e94fc9d64c7", "tabbable": null, "tooltip": null, "value": " [ elapsed time: 00:01 | time left: 00:00 ]  last batch size: 100" } }, "7062840fbc00491fb50ddeb6f80dd762": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "FloatProgressModel", "state": { "_dom_classes": [], "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "FloatProgressModel", "_view_count": null, "_view_module": "@jupyter-widgets/controls", "_view_module_version": "2.0.0", "_view_name": "ProgressView", "bar_style": "success", "description": "", "description_allow_html": false, "layout": "IPY_MODEL_7217ea720ea74de5bf9d3f9dcd3976f2", "max": 100.0, "min": 0.0, "orientation": "horizontal", "style": "IPY_MODEL_e6fdb4ad21a94aa3937a6b4a2afd14c0", "tabbable": null, "tooltip": null, "value": 100.0 } }, "7217ea720ea74de5bf9d3f9dcd3976f2": { "model_module": "@jupyter-widgets/base", "model_module_version": "2.0.0", "model_name": "LayoutModel", "state": { "_model_module": "@jupyter-widgets/base", "_model_module_version": "2.0.0", "_model_name": "LayoutModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "LayoutView", "align_content": null, "align_items": null, "align_self": null, "border_bottom": null, "border_left": null, "border_right": null, "border_top": null, "bottom": null, "display": null, "flex": null, "flex_flow": null, "grid_area": null, "grid_auto_columns": null, "grid_auto_flow": null, "grid_auto_rows": null, "grid_column": null, "grid_gap": null, "grid_row": null, "grid_template_areas": null, "grid_template_columns": null, "grid_template_rows": null, "height": null, "justify_content": null, "justify_items": null, "left": null, "margin": null, "max_height": null, "max_width": null, "min_height": null, "min_width": null, "object_fit": null, "object_position": null, "order": null, "overflow": null, "padding": null, "right": null, "top": null, "visibility": null, "width": null } }, "7bbad4a6008642249d648e94fc9d64c7": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "HTMLStyleModel", "state": { "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "HTMLStyleModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "StyleView", "background": null, "description_width": "", "font_size": null, "text_color": null } }, "8fda1003862e449b96ed9954b7a63ac0": { "model_module": "@jupyter-widgets/base", "model_module_version": "2.0.0", "model_name": "LayoutModel", "state": { "_model_module": "@jupyter-widgets/base", "_model_module_version": "2.0.0", "_model_name": "LayoutModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "LayoutView", "align_content": null, "align_items": null, "align_self": null, "border_bottom": null, "border_left": null, "border_right": null, "border_top": null, "bottom": null, "display": null, "flex": null, "flex_flow": null, "grid_area": null, "grid_auto_columns": null, "grid_auto_flow": null, "grid_auto_rows": null, "grid_column": null, "grid_gap": null, "grid_row": null, "grid_template_areas": null, "grid_template_columns": null, "grid_template_rows": null, "height": null, "justify_content": null, "justify_items": null, "left": null, "margin": null, "max_height": null, "max_width": null, "min_height": null, "min_width": null, "object_fit": null, "object_position": null, "order": null, "overflow": null, "padding": null, "right": null, "top": null, "visibility": null, "width": null } }, "c7a4db9911f84d1f877656e453e56ee2": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "HTMLModel", "state": { "_dom_classes": [], "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "HTMLModel", "_view_count": null, "_view_module": "@jupyter-widgets/controls", "_view_module_version": "2.0.0", "_view_name": "HTMLView", "description": "", "description_allow_html": false, "layout": "IPY_MODEL_39212a61d44c4557b8863ab494b8bd3d", "placeholder": "​", "style": "IPY_MODEL_5ccf3c0619cd442eb25cd6f405297c23", "tabbable": null, "tooltip": null, "value": "Completed: 100%" } }, "e6fdb4ad21a94aa3937a6b4a2afd14c0": { "model_module": "@jupyter-widgets/controls", "model_module_version": "2.0.0", "model_name": "ProgressStyleModel", "state": { "_model_module": "@jupyter-widgets/controls", "_model_module_version": "2.0.0", "_model_name": "ProgressStyleModel", "_view_count": null, "_view_module": "@jupyter-widgets/base", "_view_module_version": "2.0.0", "_view_name": "StyleView", "bar_color": null, "description_width": "" } } }, "version_major": 2, "version_minor": 0 } } }, "nbformat": 4, "nbformat_minor": 5 }