Pulsar

The Pulsar driver is separated into three layers:

QCoDeS driver: Instrument driver based on QCoDeS and the instrument’s native interface.
Native interface: Instrument API that provides control over the instrument and is an extension of the the SCPI interface.
SCPI interface: Instrument API based on the SCPI standard which in turn is based on IEEE488.2.

QCoDeS driver

class qblox_instruments.Pulsar(*args: Any, **kwargs: Any)[source]

Bases: qblox_instruments.native.pulsar.Pulsar, qcodes.instrument.base.Instrument

This class connects QCoDeS to the Pulsar native interface.

__init__(name: str, identifier: Optional[str] = None, port: Optional[int] = None, debug: Optional[int] = None, dummy_type: Optional[qblox_instruments.types.PulsarType] = None)[source]

Creates Pulsar QCoDeS class and adds all relevant instrument parameters. These instrument parameters call the associated methods provided by the native interface.

Parameters

name (str) – Instrument name.
identifier (Optional[str]) – Instrument identifier. See resolve(). If None, the instrument is identified by name.
port (Optional[int]) – Override for the TCP port through which we should connect.
debug (Optional[int]) – Debug level (0 | None = normal, 1 = no version check, >1 = no version or error checking).
dummy_type (Optional[PulsarType]) – Configure as dummy module of specified type.

property sequencers: List

Get list of sequencers submodules.

Returns: List of sequencer submodules.
Return type: list

reset() → None[source]: Resets device, invalidates QCoDeS parameter cache and clears all status and event registers (see SCPI).

QCoDeS instrument parameters

QCoDeS parameters generated by Pulsar. The parameters are dscribed in QCM-QRM.

Native interface

class qblox_instruments.native.Pulsar(identifier: str, port: Optional[int] = None, debug: Optional[int] = None, dummy_type: Optional[qblox_instruments.types.PulsarType] = None)[source]

Bases: object

Class that provides the native API for the Pulsar. It provides methods to control all functions and features provided by the Pulsar, like sequencer, waveform and acquistion handling.

This class is build upon the PulsarQcm and PulsarQrm classes through composition. This allows us to create a generic native Pulsar class that supports both Pulsar types, but only exposes the relevant interfaces, while also keeping the SCPI classes automatically generated for fast prototyping and development. On instantiation, this class probes the connected device to see which Pulsar SCPI interface to support and adds all respective attributes to this class. Afterwards, this class can be used as if it inherits from it’s respective Pulsar SCPI interface with all features and functionality available.

Note that the bulk of the functionality of this class is contained in the generic_func module so that this functionality can be shared between instruments.

__init__(identifier: str, port: Optional[int] = None, debug: Optional[int] = None, dummy_type: Optional[qblox_instruments.types.PulsarType] = None)[source]

Creates Pulsar native interface object.

Parameters

identifier (str) – Instrument identifier. See resolve() for more information.
port (Optional[int]) – Instrument port. If None, this will be determined automatically.
debug (Optional[int]) – Debug level (0 | None = normal, 1 = no version check, >1 = no version or error checking).
dummy_type (Optional[PulsarType]) – Configure as dummy module of specified type.

Raises

RuntimeError – Instrument cannot be reached due to invalid IP configuration.
ConnectionError – Instrument type is not supported.

property instrument_class: qblox_instruments.types.InstrumentClass

Get instrument class (e.g. Pulsar, Cluster).

Returns: Instrument class
Return type: InstrumentClass

property instrument_type: qblox_instruments.types.InstrumentType

Get instrument type (e.g. QRM, QCM).

Returns: Instrument type
Return type: InstrumentType

property is_qcm_type: bool

Return if module is of type QCM.

Returns: True if module is of type QCM.
Return type: bool

property is_qrm_type: bool

Return if module is of type QRM.

Returns: True if module is of type QRM.
Return type: bool

property is_rf_type: bool

Return if module is of type QCM-RF or QRM-RF.

Returns: True if module is of type QCM-RF or QRM-RF.
Return type: bool

get_idn() → Dict[source]

Get device identity and build information and convert them to a dictionary.

Returns: Dictionary containing manufacturer, model, serial number and build information. The build information is subdivided into FPGA firmware, kernel module software, application software and driver software build information. Each of those consist of the version, build date, build Git hash and Git build dirty indication.
Return type: dict

get_system_state() → qblox_instruments.native.generic_func.SystemState[source]

Get general system state and convert it to a SystemState.

Returns: Tuple containing general system status and corresponding flags.
Return type: SystemStatus

arm_sequencer(sequencer: Optional[int] = None) → None[source]

Prepare the indexed sequencer to start by putting it in the armed state. If no sequencer index is given, all sequencers are armed. Any sequencer that was already running is stopped and rearmed. If an invalid sequencer index is given, an error is set in system error.

Parameters: sequencer (Optional[int]) – Sequencer index.
Raises: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

start_sequencer(sequencer: Optional[int] = None) → None[source]

Start the indexed sequencer, thereby putting it in the running state. If an invalid sequencer index is given or the indexed sequencer was not yet armed, an error is set in system error. If no sequencer index is given, all armed sequencers are started and any sequencer not in the armed state is ignored. However, if no sequencer index is given and no sequencers are armed, and error is set in system error.

Parameters: sequencer (Optional[int]) – Sequencer index.
Raises: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

stop_sequencer(sequencer: Optional[int] = None) → None[source]

Stop the indexed sequencer, thereby putting it in the stopped state. If an invalid sequencer index is given, an error is set in system error. If no sequencer index is given, all sequencers are stopped.

Parameters: sequencer (Optional[int]) – Sequencer index.
Raises: RuntimeError – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_sequencer_state(sequencer: int, timeout: int = 0, timeout_poll_res: float = 0.02) → qblox_instruments.native.generic_func.SequencerState[source]

Get the sequencer state. If an invalid sequencer index is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the sequencer completes. If the sequencer hasn’t stopped before the timeout expires, a TimeoutError is thrown.

Parameters

sequencer (int) – Sequencer index.
timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns

Tuple containing sequencer status and corresponding flags.

Return type

SequencerState

Raises

TimeoutError – Timeout

get_waveforms(sequencer: int) → Dict[source]

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

name: waveform name.
- data: waveform samples in a range of 1.0 to -1.0.
- index: waveform index used by the sequencer Q1ASM program to refer
  to the waveform.

Parameters: sequencer (int) – Sequencer index.
Returns: Dictionary with waveforms.
Return type: dict

get_weights(sequencer: int) → Dict[source]

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

data: weight samples in a range of 1.0 to -1.0.

index: weight index used by the sequencer Q1ASM program to refer
to the weight.

Parameters: sequencer (int) – Sequencer index.
Returns: Dictionary with weights.
Return type: dict
Raises: NotImplementedError – Functionality not available on this module.

get_acquisition_state(sequencer: int, timeout: int = 0, timeout_poll_res: float = 0.02) → bool[source]

Return acquisition binning completion state of the indexed sequencer. If an invalid sequencer is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the acquisition binning completes. If the acquisition hasn’t completed before the timeout expires, a TimeoutError is thrown. Note that when sequencer state checking is enabled, the sequencer state is checked using get_sequencer_state with the selected timeout period first and then the acquisition state is checked with the same timeout period. This means that the total timeout period is two times the set timeout period.

Parameters

sequencer (int) – Sequencer index.
timeout (int) – Timeout in minutes.
timeout_poll_res (float) – Timeout polling resolution in seconds.
check_seq_state (bool) – Check if sequencer is done before checking acquisition state.

Returns

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type

bool

Raises

TimeoutError – Timeout
NotImplementedError – Functionality not available on this module.

store_scope_acquisition(sequencer: int, name: str) → None[source]

After an acquisition has completed, store the scope acquisition results in the acquisition specified by name of the indexed sequencers. If an invalid sequencer index is given an error is set in system error. To get access to the acquisition results, the sequencer will be stopped when calling this function.

Parameters

sequencer (int) – Sequencer index.
name (str) – Acquisition name.

Raises

NotImplementedError – Functionality not available on this module.

get_acquisitions(sequencer: int) → Dict[source]

Get all acquisitions in acquisition lists of indexed sequencer. The acquisition scope and bin data is normalized to a range of -1.0 to 1.0 taking both the bit widths of the processing path and average count into considaration. For the binned integration results, the integration length is not handled during normalization and therefore these values have to be divided by their respective integration lenghts. The returned dictionary is structured as follows:

name: acquisition name
- index: acquisition index used by the sequencer Q1ASM program to
  refer to the acquisition.
- acquisition: acquisition dictionary
  scope: Scope data
  
  path0: input path 0
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire
  acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  path1: input path 1
  
  data: acquisition samples in a range of 1.0 to -1.0.
  
  out-of-range: out-of-range indication for the entire
  acquisition (False = in-range, True = out-of-range).
  
  avg_cnt: number of averages.
  
  bins: bin data
  
  integration: integration data
  
  path_0: input path 0 integration result bin list
  
  path_1: input path 1 integration result bin list
  
  threshold: threshold result bin list
  
  valid: list of valid indications per bin
  
  avg_cnt: list of number of averages per bin

Parameters: sequencer (int) – Sequencer index.
Returns: Dictionary with acquisitions.
Return type: dict
Raises: NotImplementedError – Functionality not available on this module.

SCPI interface

Based on the used instrument, one of the two following interfaces is selected.

QCM interface

class qblox_instruments.scpi.PulsarQcm(transport: qblox_instruments.ieee488_2.transport.Transport, debug: int = 0)[source]

Bases: qblox_instruments.ieee488_2.ieee488_2.Ieee488_2

This interface provides an API for the mandatory and required SCPI calls and adds Pulsar related functionality (see SCPI).

__init__(transport: qblox_instruments.ieee488_2.transport.Transport, debug: int = 0)[source]

Creates SCPI interface object.

Parameters

transport (Transport) – Transport class responsible for the lowest level of communication (e.g. Ethernet).
debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Raises

ConnectionError – Debug level is 0 and there is a device or version mismatch.

get_system_error() → str[source]

Get system error from queue (see SCPI).

Parameters: None –
Returns: System error description string.
Return type: str

get_num_system_error() → int[source]

Get number of system errors (see SCPI).

Parameters: None –
Returns: Current number of system errors.
Return type: int

get_system_version() → str[source]

Get SCPI system version (see SCPI).

Parameters: None –
Returns: SCPI system version.
Return type: str
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_name(name: str) → None[source]

Sets the customer-specified name of the instrument. The name must not contain any newlines, backslashes, or double quotes.

Parameters

name (str) – The new name for the device.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_name() → str[source]

Returns the customer-specified name of the instrument.

Parameters

None –

Returns

The name of the device.

Return type

str

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_ip_config(config: str) → None[source]

Reconfigures the IP address of this device. The configuration will not go into effect until reboot() is called or the device is power-cycled.

Parameters

config (str) –

IP configuration. May be one of the following things:

an IPv4 address including prefix length, for example 192.168.0.2/24, - the string dhcp to enable IPv4 DHCP, - an IPv6 address including prefix length, for example 1:2::3:4/64, or - a semicolon-separated combination of an IPv4 configuration (IP address or dhcp) and an IPv6 address.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_ip_config() → str[source]

Returns the IP address configuration that will go into effect when the device reboots.

Parameters

None –

Returns

IP configuration. Can be one of the following things:

an IPv4 address including prefix length, for example 192.168.0.2/24, - the string dhcp to enable IPv4 DHCP, - an IPv6 address including prefix length, for example 1:2::3:4/64, or - a semicolon-separated combination of an IPv4 configuration (IP address or dhcp) and an IPv6 address.

Return type

str

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

reboot() → None[source]

Reboots the instrument.

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

clear() → None[source]

Clear all status and event registers (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_status_byte() → int[source]

Get status byte register. Register is only cleared when feeding registers are cleared (see SCPI).

Parameters: None –
Returns: Status byte register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_service_request_enable(reg: int) → None[source]

Set service request enable register (see SCPI).

Parameters

reg (int) – Service request enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_service_request_enable() → int[source]

Get service request enable register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Service request enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_standard_event_status_enable(reg: int) → None[source]

Set standard event status enable register (see SCPI).

Parameters

reg (int) – Standard event status enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status_enable() → int[source]

Get standard event status enable register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Standard event status enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status() → int[source]

Get standard event status register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Standard event status register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_complete() → None[source]

Set device in operation complete query active state (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_complete() → bool[source]

Get operation complete state (see SCPI).

Parameters: None –
Returns: Operation complete state (False = running, True = completed).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

test() → bool[source]

Run self-test. Currently not implemented (see SCPI).

Parameters: None –
Returns: Test result (False = failed, True = success).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

wait() → None[source]

Wait until operations completed before continuing (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

preset_system_status() → None[source]

Preset system status registers. Connects general system status flags for PLL unlock and temperature out-of-range indications to event status enable, status questionable temperature and status questionable frequency registers respectively (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_condition() → int[source]

Get status questionable condition register (see SCPI).

Parameters: None –
Returns: Status questionable condition register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_event() → int[source]

Get status questionable event register (see SCPI).

Parameters: None –
Returns: Status questionable event register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_questionable_enable(reg: int) → None[source]

Set status questionable enable register (see SCPI).

Parameters

reg (int) – Status questionable enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_enable() → int[source]

Get status questionable enable register (see SCPI).

Parameters: None –
Returns: Status questionable enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_condition() → int[source]

Get status operation condition register (see SCPI).

Parameters: None –
Returns: Status operation condition register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_events() → int[source]

Get status operation event register (see SCPI).

Parameters: None –
Returns: Status operation event register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_enable(reg: int) → None[source]

Set status operation enable register (see SCPI).

Parameters

reg (int) – Status operation enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_enable() → int[source]

Get status operation enable register (see SCPI).

Parameters: None –
Returns: Status operation enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

identify() → None[source]

Toggle frontpanel LEDs to visually identify the instrument.

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_afe_temperature() → float[source]

Get current analog frontend board temperature (inside device).

Parameters: None –
Returns: Current analog frontend board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_afe_temperature() → float[source]

Get maximum analog frontend board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum analog frontend board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_lo_temperature() → float[source]

Get current local oscillator board temperature (inside device).

Parameters: None –
Returns: Current local oscillator board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_lo_temperature() → float[source]

Get maximum local oscillator board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum local oscillator board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_fpga_temperature() → float[source]

Get current FPGA junction temperature (inside device).

Parameters: None –
Returns: Current FPGA junction temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_fpga_temperature() → float[source]

Get maximum FPGA junction temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum FPGA junction temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_carrier_temperature() → float[source]

Get current carrier board temperature (inside device).

Parameters: None –
Returns: Current carrier board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_carrier_temperature() → float[source]

Get maximum carrier board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum carrier board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_status() → bool[source]

Get assembler status. Refer to the assembler log to get more information regarding the assembler result.

Parameters: None –
Returns: Assembler status (False = failed, True = success).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_log() → str[source]

Get assembler log.

Parameters: None –
Returns: Assembler log.
Return type: str
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

QRM interface

class qblox_instruments.scpi.PulsarQrm(transport: qblox_instruments.ieee488_2.transport.Transport, debug: int = 0)[source]

Bases: qblox_instruments.ieee488_2.ieee488_2.Ieee488_2

This interface provides an API for the mandatory and required SCPI calls and adds Pulsar related functionality (see SCPI).

__init__(transport: qblox_instruments.ieee488_2.transport.Transport, debug: int = 0)[source]

Creates SCPI interface object.

Parameters

transport (Transport) – Transport class responsible for the lowest level of communication (e.g. Ethernet).
debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Raises

ConnectionError – Debug level is 0 and there is a device or version mismatch.

get_system_error() → str[source]

Get system error from queue (see SCPI).

Parameters: None –
Returns: System error description string.
Return type: str

get_num_system_error() → int[source]

Get number of system errors (see SCPI).

Parameters: None –
Returns: Current number of system errors.
Return type: int

get_system_version() → str[source]

Get SCPI system version (see SCPI).

Parameters: None –
Returns: SCPI system version.
Return type: str
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_name(name: str) → None[source]

Sets the customer-specified name of the instrument. The name must not contain any newlines, backslashes, or double quotes.

Parameters

name (str) – The new name for the device.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_name() → str[source]

Returns the customer-specified name of the instrument.

Parameters

None –

Returns

The name of the device.

Return type

str

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_ip_config(config: str) → None[source]

Reconfigures the IP address of this device. The configuration will not go into effect until reboot() is called or the device is power-cycled.

Parameters

config (str) –

IP configuration. May be one of the following things:

an IPv4 address including prefix length, for example 192.168.0.2/24, - the string dhcp to enable IPv4 DHCP, - an IPv6 address including prefix length, for example 1:2::3:4/64, or - a semicolon-separated combination of an IPv4 configuration (IP address or dhcp) and an IPv6 address.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_ip_config() → str[source]

Returns the IP address configuration that will go into effect when the device reboots.

Parameters

None –

Returns

IP configuration. Can be one of the following things:

an IPv4 address including prefix length, for example 192.168.0.2/24, - the string dhcp to enable IPv4 DHCP, - an IPv6 address including prefix length, for example 1:2::3:4/64, or - a semicolon-separated combination of an IPv4 configuration (IP address or dhcp) and an IPv6 address.

Return type

str

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

reboot() → None[source]

Reboots the instrument.

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

clear() → None[source]

Clear all status and event registers (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_status_byte() → int[source]

Get status byte register. Register is only cleared when feeding registers are cleared (see SCPI).

Parameters: None –
Returns: Status byte register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_service_request_enable(reg: int) → None[source]

Set service request enable register (see SCPI).

Parameters

reg (int) – Service request enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_service_request_enable() → int[source]

Get service request enable register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Service request enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_standard_event_status_enable(reg: int) → None[source]

Set standard event status enable register (see SCPI).

Parameters

reg (int) – Standard event status enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status_enable() → int[source]

Get standard event status enable register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Standard event status enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status() → int[source]

Get standard event status register. The register is cleared after reading it (see SCPI).

Parameters: None –
Returns: Standard event status register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_complete() → None[source]

Set device in operation complete query active state (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_complete() → bool[source]

Get operation complete state (see SCPI).

Parameters: None –
Returns: Operation complete state (False = running, True = completed).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

test() → bool[source]

Run self-test. Currently not implemented (see SCPI).

Parameters: None –
Returns: Test result (False = failed, True = success).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

wait() → None[source]

Wait until operations completed before continuing (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

preset_system_status() → None[source]

Preset system status registers. Connects general system status flags for PLL unlock and temperature out-of-range indications to event status enable, status questionable temperature and status questionable frequency registers respectively (see SCPI).

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_condition() → int[source]

Get status questionable condition register (see SCPI).

Parameters: None –
Returns: Status questionable condition register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_event() → int[source]

Get status questionable event register (see SCPI).

Parameters: None –
Returns: Status questionable event register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_questionable_enable(reg: int) → None[source]

Set status questionable enable register (see SCPI).

Parameters

reg (int) – Status questionable enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_enable() → int[source]

Get status questionable enable register (see SCPI).

Parameters: None –
Returns: Status questionable enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_condition() → int[source]

Get status operation condition register (see SCPI).

Parameters: None –
Returns: Status operation condition register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_events() → int[source]

Get status operation event register (see SCPI).

Parameters: None –
Returns: Status operation event register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_enable(reg: int) → None[source]

Set status operation enable register (see SCPI).

Parameters

reg (int) – Status operation enable register.

Return type

None

Raises

Exception – Invalid input parameter type.
Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_enable() → int[source]

Get status operation enable register (see SCPI).

Parameters: None –
Returns: Status operation enable register.
Return type: int
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

identify() → None[source]

Toggle frontpanel LEDs to visually identify the instrument.

Parameters: None –
Return type: None
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_afe_temperature() → float[source]

Get current analog frontend board temperature (inside device).

Parameters: None –
Returns: Current analog frontend board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_afe_temperature() → float[source]

Get maximum analog frontend board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum analog frontend board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_lo_temperature() → float[source]

Get current local oscillator board temperature (inside device).

Parameters: None –
Returns: Current local oscillator board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_lo_temperature() → float[source]

Get maximum local oscillator board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum local oscillator board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_fpga_temperature() → float[source]

Get current FPGA junction temperature (inside device).

Parameters: None –
Returns: Current FPGA junction temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_fpga_temperature() → float[source]

Get maximum FPGA junction temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum FPGA junction temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_carrier_temperature() → float[source]

Get current carrier board temperature (inside device).

Parameters: None –
Returns: Current carrier board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_carrier_temperature() → float[source]

Get maximum carrier board temperature since boot or clear (inside device).

Parameters: None –
Returns: Maximum carrier board temperature.
Return type: float
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_status() → bool[source]

Get assembler status. Refer to the assembler log to get more information regarding the assembler result.

Parameters: None –
Returns: Assembler status (False = failed, True = success).
Return type: bool
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_log() → str[source]

Get assembler log.

Parameters: None –
Returns: Assembler log.
Return type: str
Raises: Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

Supporting classes and functions

Please have a look at: