Pulsar QRM

The Pulsar QRM driver is separated into three layers:

• QCoDeS driver: Instrument driver based on QCoDeS and the instrument’s native interface.

• Native interface: Instrument API that provides control over the instrument and is an extension of the the SCPI interface.

• SCPI interface: Instrument API based on the SCPI standard which in turn is based on IEEE488.2.

QCoDeS driver

class pulsar_qrm.pulsar_qrm.pulsar_qrm_qcodes(name, transport_inst, debug=0)

Bases: pulsar_qrm.pulsar_qrm_ifc.pulsar_qrm_ifc, qcodes.instrument.base.Instrument

This class connects QCoDeS to the Pulsar QRM native interface. Do not directly instantiate this class, but instead instantiate either the pulsar_qrm or pulsar_qrm_dummy.

__init__(name, transport_inst, debug=0)

Creates Pulsar QRM QCoDeS class and adds all relevant instrument parameters. These instrument parameters call the associated methods provided by the native interface.

Parameters

• name (str) – Instrument name.

• transport_inst (transport) – Transport class responsible for the lowest level of communication (e.g. ethernet).

• debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Raises

Exception – Debug level is 0 and there is a version mismatch.

Note

To get a complete of list of the QCoDeS parameters, run the following code.

from pulsar_qrm.pulsar_qrm import pulsar_qrm_dummy

qrm = pulsar_qrm_dummy("qrm")
for call in qrm.snapshot()['parameters']:
    print(getattr(qrm, call).__doc__)

class pulsar_qrm.pulsar_qrm.pulsar_qrm(name, host, port=5025, debug=0)

Bases: pulsar_qrm.pulsar_qrm.pulsar_qrm_qcodes

Pulsar QRM driver class based on QCoDeS that uses an IP socket to communicate with the instrument.

__init__(name, host, port=5025, debug=0)

Creates Pulsar QRM driver object.

Parameters

• name (str) – Instrument name.

• host (str) – Instrument IP address.

• port (int) – Instrument port.

• debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Raises

Exception – Debug level is 0 and there is a version mismatch.

class pulsar_qrm.pulsar_qrm.pulsar_qrm_dummy(name, debug=1)

Bases: pulsar_qrm.pulsar_qrm.pulsar_qrm_qcodes

Pulsar QRM driver class based on QCoDeS that uses the pulsar_dummy_transport layer to substitute an actual Pulsar QRM to allow software stack development without hardware.

__init__(name, debug=1)

Creates Pulsar QRM driver object. The debug level must be set to >= 1.

Parameters

• name (str) – Instrument name.

• debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

QCoDeS parameters

QCoDeS parameters generated by pulsar_qrm_qcodes.

Note

Only sequencer 0’s parameters are listed, but all other sequencers have the same parameters.

pulsar_qrm.IDN

Please see QCoDeS for a description.

Properties

• value: Anything

pulsar_qrm.reference_source

Sets/gets reference source (‘internal’ = internal 10 MHz, ‘external’ = external 10 MHz).

Properties

• value: Enum: {‘internal’, ‘external’}

pulsar_qrm.in0_amp_gain

Sets/gets input 0 amplifier gain in a range of -6dB to 26dB with a resolution of 1dB per step.

Properties

• unit: dB

• value: Numbers -6<=v<=26

pulsar_qrm.in1_amp_gain

Sets/gets input 1 amplifier gain in a range of -6dB to 26dB with a resolution of 1dB per step.

Properties

• unit: dB

• value: Numbers -6<=v<=26

pulsar_qrm.scope_acq_trigger_mode_path0

Sets/gets scope acquisition trigger mode for input path 0 (‘sequencer’ = triggered by sequencer, ‘level’ = triggered by input level).

Properties

• value: Enum: {‘level’, ‘sequencer’}

pulsar_qrm.scope_acq_trigger_mode_path1

Sets/gets scope acquisition trigger mode for input path 1 (‘sequencer’ = triggered by sequencer, ‘level’ = triggered by input level).

Properties

• value: Enum: {‘level’, ‘sequencer’}

pulsar_qrm.scope_acq_trigger_level_path0

Sets/gets scope acquisition trigger level when using input level trigger mode for input path 0.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.scope_acq_trigger_level_path1

Sets/gets scope acquisition trigger level when using input level trigger mode for input path 1.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.scope_acq_sequencer_select

Sets/gets sequencer select that specifies which sequencer triggers the scope acquisition when using sequencer trigger mode.

Properties

• value: Numbers 0<=v<=1

pulsar_qrm.scope_acq_avg_mode_en_path0

Sets/gets scope acquisition averaging mode enable for input path 0.

Properties

• value: Boolean

pulsar_qrm.scope_acq_avg_mode_en_path1

Sets/gets scope acquisition averaging mode enable for input path 0.

Properties

• value: Boolean

pulsar_qrm.sequencer0_sync_en

Sets/gets sequencer 0 synchronization enable which enables party-line synchronization.

Properties

• value: Boolean

pulsar_qrm.sequencer0_nco_freq

Sets/gets sequencer 0 NCO frequency in Hz with a resolution of 0.25 Hz.

Properties

• unit: Hz

• value: Numbers -300000000.0<=v<=300000000.0

pulsar_qrm.sequencer0_nco_phase_offs

Sets/gets sequencer 0 NCO phase offset in degrees with a resolution of 3.6e-7 degrees.

Properties

• unit: Degrees

• value: Numbers 0<=v<=360

pulsar_qrm.sequencer0_marker_ovr_en

Sets/gets sequencer 0 marker override enable.

Properties

• value: Boolean

pulsar_qrm.sequencer0_marker_ovr_value

Sets/gets sequencer 0 marker override value. Bit index corresponds to marker channel index.

Properties

• value: Numbers 0<=v<=15

pulsar_qrm.sequencer0_waveforms_and_program

Sets sequencer 0 AWG waveforms, acquistion weights, acquisitions and ASM program. Valid input is a string representing the JSON filename.

Properties

• value: Strings

pulsar_qrm.sequencer0_cont_mode_en_awg_path0

Sets/gets sequencer 0 continous waveform mode enable for AWG path 0.

Properties

• value: Boolean

pulsar_qrm.sequencer0_cont_mode_en_awg_path1

Sets/gets sequencer 0 continous waveform mode enable for AWG path 1.

Properties

• value: Boolean

pulsar_qrm.sequencer0_cont_mode_waveform_idx_awg_path0

Sets/gets sequencer 0 continous waveform mode waveform index or AWG path 0.

Properties

• value: Numbers 0<=v<=1023

pulsar_qrm.sequencer0_cont_mode_waveform_idx_awg_path1

Sets/gets sequencer 0 continous waveform mode waveform index or AWG path 1.

Properties

• value: Numbers 0<=v<=1023

pulsar_qrm.sequencer0_upsample_rate_awg_path0

Sets/gets sequencer 0 upsample rate for AWG path 0.

Properties

• value: Numbers 0<=v<=65535

pulsar_qrm.sequencer0_upsample_rate_awg_path1

Sets/gets sequencer 0 upsample rate for AWG path 1.

Properties

• value: Numbers 0<=v<=65535

pulsar_qrm.sequencer0_gain_awg_path0

Sets/gets sequencer 0 gain for AWG path 0.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.sequencer0_gain_awg_path1

Sets/gets sequencer 0 gain for AWG path 1.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.sequencer0_offset_awg_path0

Sets/gets sequencer 0 offset for AWG path 0.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.sequencer0_offset_awg_path1

Sets/gets sequencer 0 offset for AWG path 1.

Properties

• value: Numbers -1.0<=v<=1.0

pulsar_qrm.sequencer0_mod_en_awg

Sets/gets sequencer 0 modulation enable for AWG.

Properties

• value: Boolean

pulsar_qrm.sequencer0_demod_en_acq

Sets/gets sequencer 0 demodulation enable for acquisition.

Properties

• value: Boolean

pulsar_qrm.sequencer0_integration_length_acq

Sets/gets sequencer 0 integration length in number of samples for non-weighed acquisitions on paths 0 and 1. Must be a multiple of 4

Properties

• value: Ints 4<=v<=16777212, Multiples of 4

pulsar_qrm.sequencer0_phase_rotation_acq

Sets/gets sequencer 0 integration result phase rotation in degrees.

Properties

• unit: Degrees

• value: Numbers 0<=v<=360

pulsar_qrm.sequencer0_discretization_threshold_acq

Sets/gets sequencer 0 discretization threshold for discretizing the phase rotation result. Discretization is done by comparing the threshold to the rotated integration result of path 0. This comparison is applied before normalization (i.e. division) of the rotated value with the integration length and therefore the threshold needs to be compensated (i.e. multiplied) with this length for the discretization to function properly.

Properties

• value: Numbers -16777212.0<=v<=16777212.0

Native interface

class pulsar_qrm.pulsar_qrm_ifc.pulsar_qrm_ifc(transport_inst, debug=0)

Bases: pulsar_qrm.pulsar_qrm_scpi_ifc.pulsar_qrm_scpi_ifc

Class that provides the native API for the Pulsar QrM. It provides methods to control all functions and features provided by the Pulsar QRM, like sequencer, waveform and acquistion handling.

__init__(transport_inst, debug=0)

Creates Pulsar QRM native interface object.

Parameters

• transport_inst (transport) – Transport class responsible for the lowest level of communication (e.g. ethernet).

• debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Returns

Pulsar QRM native interface object.

Return type

pulsar_qrm_ifc

Raises

Exception – Debug level is 0 and there is a version mismatch.

get_idn()

Get device identity and build information.

Returns

Dictionary containing manufacturer, model, serial number and build information. The build information is subdivided into FPGA firmware, kernel module software, application software and driver software build information. Each of those consist of the version, build date, build Git hash and Git build dirty indication.

Return type

dict

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_system_status()

Get general system state.

Returns

Dictionary containing general status and corresponding flags:

Status

• OKAY: System is okay.

• CRITICAL: An error indicated by the flags occured, but has been resolved.

• ERROR: An error indicated by the flags is occuring.

Flags

• CARRIER_PLL_UNLOCK: Carrier board PLL is unlocked.

• FPGA_PLL_UNLOCK: FPGA PLL is unlocked.

• FPGA_TEMP_OR: FPGA temperature is out-of-range.

• CARRIER_TEMP_OR: Carrier board temperature is out-of-range.

• AFE_TEMP_OR: Analog frontend board temperature is out-of-range.

Return type

dict

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

arm_sequencer(sequencer=None)

Prepare the indexed sequencer to start by putting it in the armed state. If no sequencer index is given, all sequencers are armed. Any sequencer that was already running is stopped and rearmed. If an invalid sequencer index is given, an error is set in system error.

Parameters

sequencer (int) – Sequencer index.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

start_sequencer(sequencer=None)

Start the indexed sequencer, thereby putting it in the running state. If an invalid sequencer index is given or the indexed sequencer was not yet armed, an error is set in system error. If no sequencer index is given, all armed sequencers are started and any sequencer not in the armed state is ignored. However, if no sequencer index is given and no sequencers are armed, and error is set in system error.

Parameters

sequencer (int) – Sequencer index.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

stop_sequencer(sequencer=None)

Stop the indexed sequencer, thereby putting it in the stopped state. If an invalid sequencer index is given, an error is set in system error. If no sequencer index is given, all sequencers are stopped.

Parameters

sequencer (int) – Sequencer index.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_sequencer_state(sequencer, timeout=0, timeout_poll_res=0.1)

Get the sequencer state. If an invalid sequencer index is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the sequencer completes. If the sequencer hasn’t stopped before the timeout expires, a timeout exception is thrown.

Parameters

• sequencer (int) – Sequencer index.

• timeout (int) – Timeout in minutes.

• timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns

Concatinated list of strings separated by the semicolon character. Status is indicated by one status string and an optional number of flags respectively ordered as:

Status

• IDLE: Sequencer waiting to be armed and started.

• ARMED: Sequencer is armed and ready to start.

• RUNNING: Sequencer is running.

• Q1 STOPPED: Classical part of the sequencer has stopped; waiting for real-time part to stop.

• STOPPED: Sequencer has completely stopped.

Flags

• DISARMED: Sequencer was disarmed.

• FORCED STOP: Sequencer was stopped while still running.

• SEQUENCE PROCESSOR Q1 ILLEGAL INSTRUCTION: Classical sequencer part executed an unknown instruction.

• SEQUENCE PROCESSOR RT EXEC ILLEGAL INSTRUCTION: Real-time sequencer part executed an unknown instruction.

• AWG WAVE PLAYBACK INDEX INVALID PATH 0: AWG path 0 tried to play an unknown waveform.

• AWG WAVE PLAYBACK INDEX INVALID PATH 1: AWG path 1 tried to play an unknown waveform.

• ACQ WEIGHT PLAYBACK INDEX INVALID PATH 0: Acquisition path 0 tried to play an unknown weight.

• ACQ WEIGHT PLAYBACK INDEX INVALID PATH 1: Acquisition path 1 tried to play an unknown weight.

• ACQ SCOPE DONE PATH 0: Scope acquisition for path 0 has finished.

• ACQ SCOPE OUT-OF-RANGE PATH 0: Scope acquisition data for path 0 was out-of-range.

• ACQ SCOPE OVERWRITTEN PATH 0: Scope acquisition data for path 0 was overwritten.

• ACQ SCOPE DONE PATH 1: Scope acquisition for path 1 has finished.

• ACQ SCOPE OUT-OF-RANGE PATH 1: Scope acquisition data for path 1 was out-of-range.

• ACQ SCOPE OVERWRITTEN PATH 1: Scope acquisition data for path 1 was overwritten.

• ACQ BINNING DONE: Acquisition binning completed.

• ACQ BINNING FIFO ERROR: Acqusition binning encountered internal FIFO error.

• ACQ BINNING COMM ERROR: Acqusition binning encountered internal communication error.

• ACQ BINNING OUT-OF-RANGE: Acquisition binning data out-of-range.

• ACQ INDEX INVALID: Acquisition tried to process an invalid acquisition.

• ACQ BIN INDEX INVALID: Acquisition tried to process an invalid bin.

• CLOCK INSTABILITY: Clock source instability occurred.

Return type

list

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

• TypeError – Timeout is not an integer.

• TimeoutError – Timeout

get_waveforms(sequencer)

Get all waveforms and weigths in the AWG waveform list of indexed sequencer. The returned dictionary is structured as follows:

• name: waveform name.

  • data: waveform samples in a range of 1.0 to -1.0.

  • index: waveform index used by the sequencer Q1ASM program to refer to the waveform.

Parameters

sequencer (int) – Sequencer index.

Returns

Dictionary with waveforms.

Return type

dict

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_weights(sequencer)

Get all weigths in the acquisition weight lists of indexed sequencer. The returned dictionary is structured as follows:

-name : weight name.

• data: weight samples in a range of 1.0 to -1.0.

• index: weight index used by the sequencer Q1ASM program to refer to the weight.

Parameters

sequencer (int) – Sequencer index.

Returns

Dictionary with weights.

Return type

dict

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_acquisition_state(sequencer, timeout=0, timeout_poll_res=0.1)

Return acquisition binning completion state of the indexed sequencer. If an invalid sequencer is given, an error is set in system error. If the timeout is set to zero, the function returns the state immediately. If a positive non-zero timeout is set, the function blocks until the acquisition binning completes. If the acquisition hasn’t completed before the timeout expires, a timeout exception is thrown.

Parameters

• sequencer (int) – Sequencer index.

• timeout (int) – Timeout in minutes.

• timeout_poll_res (float) – Timeout polling resolution in seconds.

Returns

Indicates the acquisition binning completion state (False = uncompleted, True = completed).

Return type

bool

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

• TypeError – Timeout is not an integer.

• TimeoutError – Timeout

store_scope_acquisition(sequencer, name)

After an acquisition has completed, store the scope acquisition results in the acquisition specified by name of the indexed sequencers. If an invalid sequencer index is given an error is set in system error. To get access to the acquisition results, the sequencer will be stopped when calling this function.

Parameters

• sequencer (int) – Sequencer index.

• name (str) – Acquisition name.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_acquisitions(sequencer)

Get all acquisitions in acquisition lists of indexed sequencer. The acquisition scope and bin data is normalized to a range of -1.0 to 1.0 taking both the bit widths of the processing path and average count into considaration. For the binned integration results, the integration length is not handled during normalization and therefore these values have to be divided by their respective integration lenghts. The returned dictionary is structured as follows:

• name: acquisition name

  • index: acquisition index used by the sequencer Q1ASM program to refer to the acquisition.

  • acquisition: acquisition dictionary

    • scope: Scope data

      • path0: input path 0

        • data: acquisition samples in a range of 1.0 to -1.0.

        • out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).

        • avg_cnt: number of averages.

      • path1: input path 1

        • data: acquisition samples in a range of 1.0 to -1.0.

        • out-of-range: out-of-range indication for the entire acquisition (False = in-range, True = out-of-range).

        • avg_cnt: number of averages.

    • bins: bin data

      • integration: integration data

        • path_0: input path 0 integration result bin list

        • path_1: input path 1 integration result bin list

      • threshold: threshold result bin list

      • valid: list of valid indications per bin

      • avg_cnt: list of number of averages per bin

Parameters

sequencer (int) – Sequencer index.

Returns

Dictionary with acquisitions.

Return type

dict

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

SCPI interface

class pulsar_qrm.pulsar_qrm_scpi_ifc.pulsar_qrm_scpi_ifc(transport_inst, debug=0)

Bases: ieee488_2.ieee488_2.ieee488_2

This interface provides an API for the mandatory and required SCPI calls and adds Pulsar related functionality (see SCPI).

__init__(transport_inst, debug=0)

Creates SCPI interface object.

Parameters

• transport_inst (transport) – Transport class responsible for the lowest level of communication (e.g. ethernet).

• debug (int) – Debug level (0 = normal, 1 = no version check, >1 = no version or error checking).

Returns

SCPI interface object.

Return type

pulsar_qrm_scpi_ifc

Raises

Exception – Debug level is 0 and there is a version mismatch.

reset()

Reset device and clear all status and event registers (see SCPI).

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

clear()

Clear all status and event registers (see SCPI).

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_status_byte()

Get status byte register. Register is only cleared when feeding registers are cleared (see SCPI).

Returns

Status byte register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_service_request_enable(reg)

Set service request enable register (see SCPI).

Parameters

reg (int) – Service request enable register.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_service_request_enable()

Get service request enable register. The register is cleared after reading it (see SCPI).

Returns

Service request enable register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_standard_event_status_enable(reg)

Get standard event status enable register. The register is cleared after reading it (see SCPI).

Returns

Standard event status enable register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status_enable()

Set standard event status enable register (see SCPI).

Parameters

reg (int) – Standard event status enable register.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_standard_event_status()

Get standard event status register. The register is cleared after reading it (see SCPI).

Returns

Standard event status register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_complete()

Set device in operation complete query active state (see SCPI).

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_complete()

Get operation complete state (see SCPI).

Returns

Operation complete state (False = running, True = completed).

Return type

bool

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

test()

Run self-test. Currently not implemented (see SCPI).

Returns

Test result (False = failed, True = success).

Return type

bool

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

wait()

Wait until operations completed before continuing (see SCPI).

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_system_error()

Get system error from queue (see SCPI).

Returns

System error description string.

Return type

str

get_num_system_error()

Get number of system errors (see SCPI).

Returns

Current number of number of system errors.

Return type

int

get_system_version()

Get SCPI system version (see SCPI).

Returns

SCPI system version.

Return type

str

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

preset_system_status()

Preset system status registers. Connects general system status flags for PLL unlock and temperature out-of-range indications to event status enable, status questionable temperature and status questionable frequency registers respectively (see SCPI).

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_condition()

Get status questionable condition register (see SCPI).

Returns

Status questionable condition register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_event()

Get status questionable event register (see SCPI).

Returns

Status questionable event register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_questionable_enable(reg)

Set status questionable enable register (see SCPI).

Parameters

reg (int) – Status questionable enable register.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_questionable_enable()

Get status questionable enable register (see SCPI).

Returns

Status questionable enable register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_fpga_temperature()

Get current FPGA junction temperature (inside device).

Returns

Current FPGA junction temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_fpga_temperature()

Get maximum FPGA junction temperature since boot or clear (inside device).

Returns

Maximum FPGA junction temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_carrier_temperature()

Get current carrier board temperature (inside device).

Returns

Current carrier board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_carrier_temperature()

Get maximum carrier board temperature since boot or clear (inside device).

Returns

Maximum carrier board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_afe_temperature()

Get current analog frontend board temperature (inside device).

Returns

Current analog frontend board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_afe_temperature()

Get maximum analog frontend board temperature since boot or clear (inside device).

Returns

Maximum analog frontend board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_current_lo_temperature()

Get the current local oscillator board temperature (inside device).

Returns

Current local board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_maximum_lo_temperature()

Get maximum local oscillator board temperature since boot or clear (inside device).

Returns

Maximum local oscillator board temperature.

Return type

float

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_condition()

Get status operation condition register (see SCPI).

Returns

Status operation condition register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_events()

Get status operation event register (see SCPI).

Returns

Status operation event register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

set_operation_enable(reg)

Set status operation enable register (see SCPI).

Parameters

reg (int) – Status operation enable register.

Raises

• Exception – Invalid input parameter type.

• Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_operation_enable()

Get status operation enable register (see SCPI).

Returns

Status operation enable register.

Return type

int

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_status()

Get assembler status. Refer to the assembler log to get more information regarding the assembler result.

Returns

Assembler status (False = failed, True = success).

Return type

bool

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.

get_assembler_log()

Get assembler log.

Returns

Formatted assembler log string.

Return type

str

Raises

Exception – An error is reported in system error and debug <= 1. All errors are read from system error and listed in the exception.