Network adapter configuration

Windows

  1. Go to Control Panel > Network and Internet > Network Connections.

  2. Select the network adapter that is connected to the same network as the module(s) (e.g. USB Ethernet adapter).

  3. Right-click and select properties.

  4. Select Internet Protocol Version 4 (TCP/IPv4) and click on properties.

  5. Select Use the following IP address and specify the desired IP address (e.g. 192.168.0.200) and subnet mask (i.e. 255.255.255.0)

  6. Click on OK and Close.

Ubuntu

  1. Go to System Settings > Connections.

  2. Select the network adapter that is connected to the same network as the module(s) (e.g. USB Ethernet adapter).

  3. Set IPv4 method to Manual and specify the desired IP address (e.g. 192.168.0.200) and subnet mask (i.e. 255.255.255.0).

  4. Click on Apply and close the window.

MacOS

  1. Open System Preferences > Network.

  2. Select the network adapter that is connected to the same network as the module(s) (e.g. USB Ethernet adapter).

  3. Set Configure IPv4 to Manually and specify the desired IP address (e.g. 192.168.0.200) and subnet mask (i.e. 255.255.255.0).

  4. Click on Apply and close the window.